Hi, This series adds support for WILC1000 devices on pwrseq-sd8787 driver. WILC1000 devices needs a minimum delay of 5ms b/w reset and power lines. Adapt the sd8787 driver for this by adding a new compatible for WILC1000 devices and specify the delay on .data field of struct of_device_id. Thank you, Claudiu Beznea Changes in v3: - fixed dt binding compilation Changes in v2: - changed cover letter title (it was: mmc: pwrseq: sd8787: add support for selectable) - use new compatible in pwrseq-sd8787 driver instead of adding a new binding for specifying the delay; with this, the patch 1/1 from v1 is not necessary - adapt patch 3/3 from this version with the new compatible Claudiu Beznea (3): dt-bindings: pwrseq-sd8787: add binding for wilc1000 mmc: pwrseq: sd8787: add support for wilc1000 mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787 Eugen Hristev (1): ARM: dts: at91: sama5d27_wlsom1: add wifi device .../bindings/mmc/mmc-pwrseq-sd8787.yaml | 4 +- arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 71 +++++++++++++++++++ drivers/mmc/core/Kconfig | 2 +- drivers/mmc/core/pwrseq_sd8787.c | 11 ++- 4 files changed, 84 insertions(+), 4 deletions(-) -- 2.25.1
