Hi Haibo, Am Mittwoch, dem 18.08.2021 um 19:16 +0800 schrieb haibo.chen@xxxxxxx: > From: Haibo Chen <haibo.chen@xxxxxxx> > > Add a new fsl,broken-auto-tuning binding for sdio devices. When sdio > device support sdio interrupt, need to use this property to disable > auto-tuning. Auto-tuning circuit is conflict with sdio interrupt. > Wouldn't it be possible to do this automatically by the driver without a DT property when a SDIO card is detected? Regards, Lucas > Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx> > --- > Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > index b5baf439fbac..d7c8e5880473 100644 > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > @@ -93,6 +93,15 @@ properties: > tuning step can't find the proper delay window within limited tuning retries. > default: 0 > > + fsl,broken-auto-tuning: > + description: | > + Recommend for SDIO cards that enables SDIO interrupt for SDR104 and SDR50 mode. > + SDIO interrupt uses DAT[1] to signal the card's interrupt. Auto-tuning circuit > + will detect this interrupt on DAT[1] when in 4Bit bus mode, and take it just > + as normal data, wrongly adjust the delay cell. This property is used to disable > + the auto-tuning function. > + type: boolean > + > fsl,strobe-dll-delay-target: > $ref: /schemas/types.yaml#/definitions/uint32 > description: |
