From: Rafał Miłecki <rafal@xxxxxxxxxx>
This fixes following errors for all BCM5301X dts files:
chipcommonA@18000000: $nodename:0: 'chipcommonA@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mdio-bus-mux@18003000: $nodename:0: 'mdio-bus-mux@18003000' does not match '^mdio-mux[\\-@]?'
dmu@1800c000: $nodename:0: 'dmu@1800c000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 2 +-
arch/arm/boot/dts/bcm5301x.dtsi | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 05d4f2931772..9bef6b9bfa8d 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -129,7 +129,7 @@ bluebar8 {
};
};
- mdio-bus-mux@18003000 {
+ mdio-mux@18003000 {
/* BIT(9) = 1 => external mdio */
mdio@200 {
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index f92089290ccd..f9d3a53065ef 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -19,7 +19,7 @@ / {
#size-cells = <1>;
interrupt-parent = <&gic>;
- chipcommonA@18000000 {
+ chipcommon-a-bus@18000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x00001000>;
#address-cells = <1>;
@@ -44,7 +44,7 @@ uart1: serial@400 {
};
};
- mpcore@19000000 {
+ mpcore-bus@19000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
@@ -369,7 +369,7 @@ mdio: mdio@18003000 {
#address-cells = <1>;
};
- mdio-bus-mux@18003000 {
+ mdio-mux@18003000 {
compatible = "mdio-mux-mmioreg";
mdio-parent-bus = <&mdio>;
#address-cells = <1>;
@@ -415,7 +415,7 @@ i2c0: i2c@18009000 {
status = "disabled";
};
- dmu@1800c000 {
+ dmu-bus@1800c000 {
compatible = "simple-bus";
ranges = <0 0x1800c000 0x1000>;
#address-cells = <1>;
--
2.26.2
