Hi David,
Thanks for the comments!
On 07/30/2014 12:54 AM, David Collins wrote:
> On 07/24/2014 05:45 AM, Stanimir Varbanov wrote:
>> From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
>>
>> The Qualcomm SPMI PMIC chips are components used with the
>> Snapdragon 800 series SoC family. This driver exists
>> largely as a glue mfd component, it exists to be an owner
>> of an SPMI regmap for children devices described in
>> device tree.
>>
>> Signed-off-by: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
>> Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
>> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
>> ---
>> drivers/mfd/Kconfig | 16 +++++++++++
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/pm8xxx-spmi.c | 65 +++++++++++++++++++++++++++++++++++++++++++++
>
> Would it be possible to rename this driver: qcom-spmi-pmic.c? The driver
> will be supporting several PMICs that do not fit the pm8xxx naming scheme.
> One of which is even specified in the compatible list of this driver
> (pma8084). There is presently downstream support for the following PMICs:
> PM8019, PM8110, PM8226, PM8841, PM8916, PM8941, PM8994, PMA8084, PMD9635,
> PMI8962, and PMI8994 [1]. Four of these do not fit the "PM8XXX" template.
I haven't strong opinion on the file names. The qcom prefix is the one
which annoying me. If you look at /drivers/mfd the company name prefixes
are very few.
The *compatible* strings are the important thing here. So If MFD
maintainer is fine with this name I'm fine too.
>
> If we can agree on changing the file name for the driver, then all other
> instances of "pm8xxx" would need to be renamed in this patch series (e.g.
> config options, function names, struct names, DT binding documentation, etc.)
>
> It would probably be good to rename pm8xxx-ssbi.c to qcom-ssbi-pmic.c as
> well in order to maintain consistency.
>
> (...)
>> +static const struct regmap_config pm8xxx_regmap_config = {
>> + .reg_bits = 16,
>> + .val_bits = 8,
>> + .max_register = 0xffff,
>
> Can you please add the following line here?
>
> .fast_io = true;
>
> This will cause a spinlock to be held during SPMI transactions instead of
> a mutex lock. This is needed because several downstream peripheral
> drivers need to make SPMI read and write calls from atomic context. I
> have commented on this point in a previous thread with specific examples [2].
OK, I understand the need of atomic context, but pmic_arb_read_cmd() and
pmic_arb_write_cmd() functions use raw_spin_lock_irqsave already. Isn't
those locks enough?
>
>> +};
>
> (...)
>> +static const struct of_device_id pm8xxx_id_table[] = {
>> + { .compatible = "qcom,pm8941" },
>> + { .compatible = "qcom,pm8841" },
>> + { .compatible = "qcom,pma8084" },
>
> Would it be possible to add a generic compatible string as well? Perhaps
> something like "qcom,spmi-pmic" could be used. This driver is not doing
> anything with the PMIC specific compatible strings. The generic
> compatible string could be specified in device tree in conjunction a PMIC
> specific string that is not present in this list. That way, this driver
> file would not need to be touched as new PMIC chips are introduced unless
> some weird workaround is needed. In that case, the PMIC specific
> compatible string could be added to the list along with whatever special
> function is needed to handle it.
OK, I'm fine with this suggestion.
--
regards,
Stan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
