Enable termination-* binding and provide validation example for it.
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
.../bindings/net/can/fsl,flexcan.yaml | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
index 55bff1586b6f..3f0ee17c1461 100644
--- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -119,6 +119,9 @@ properties:
minimum: 0
maximum: 2
+ termination-gpios: true
+ termination-ohms: true
+
required:
- compatible
- reg
@@ -148,3 +151,17 @@ examples:
fsl,stop-mode = <&gpr 0x34 28>;
fsl,scu-index = /bits/ 8 <1>;
};
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ can@2090000 {
+ compatible = "fsl,imx6q-flexcan";
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 1>, <&clks 2>;
+ clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 28>;
+ termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ termination-ohms = <120>;
+ };
--
2.30.2
