Add cadence-wdt bindings documentation.
Signed-off-by: Harini Katakam <harinik@xxxxxxxxxx>
---
v4 changes:
- Change name of property "reset" to "reset-on-timeout".
- Use cdns compatible string in example.
- Improve description of clocks and interrupts.
v3 changes:
- Change reset property type and improve description.
- Improve description of clocks and interrupts.
- Use watchdog@ in the example.
- Use only cdns compatible string for now.
v2:
No changes
---
.../devicetree/bindings/watchdog/cadence-wdt.txt | 24 ++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
new file mode 100644
index 0000000..c3a36ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
@@ -0,0 +1,24 @@
+Zynq Watchdog Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible : Should be "cdns,wdt-r1p2".
+- clocks : This is pclk (APB clock).
+- interrupts : This is wd_irq - watchdog timeout interrupt.
+- interrupt-parent : Must be core interrupt controller.
+
+Optional properties
+- reset-on-timeout : If this property exists, then a reset is done
+ when watchdog times out.
+- timeout-sec : Watchdog timeout value (in seconds).
+
+Example:
+ watchdog@f8005000 {
+ compatible = "cdns,wdt-r1p2";
+ clocks = <&clkc 45>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 9 1>;
+ reg = <0xf8005000 0x1000>;
+ reset-on-timeout;
+ timeout-sec = <10>;
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
