On Mon, Aug 09, 2021 at 04:52:13PM +0800, chaochao2021666@xxxxxxx wrote: > From: Chao Zeng <chao.zeng@xxxxxxxxxxx> > > The phy status led of each of board maybe different. > Provide a method to custom phy status led behavior. > > Datasheet: > http://www.ti.com/product/DP83867IR/datasheet > > Signed-off-by: Chao Zeng <chao.zeng@xxxxxxxxxxx> > --- > .../devicetree/bindings/net/ti,dp83867.yaml | 6 ++++++ > include/dt-bindings/net/ti-dp83867.h | 18 ++++++++++++++++++ > 2 files changed, 24 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml > index 047d757e8d82..a46a437818f2 100644 > --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml > +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml > @@ -106,6 +106,12 @@ properties: > Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable > values. > > + ti,led-sel: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + This configure the status led. See dt-bindings/net/ti-dp83867.h > + for different status led settings,select different configures There's ongoing discussions about using the LED bindings/subsystem for this type of LED. Rob
