Hi, On Mon, Aug 02, 2021 at 01:39:38AM +0100, Andre Przywara wrote: > On Mon, 26 Jul 2021 16:41:37 +0200 > Maxime Ripard <maxime@xxxxxxxxxx> wrote: > > > Hi, > > > > On Fri, Jul 23, 2021 at 04:38:29PM +0100, Andre Przywara wrote: > > > Add the obvious compatible name to the existing RTC binding. > > > The actual RTC part of the device uses a different day/month/year > > > storage scheme, so it's not compatible with the previous devices. > > > Also the clock part is quite different, as there is no external 32K LOSC > > > oscillator input. > > > > > > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> > > > > > > --- > > > .../bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 14 ++++++++++++++ > > > 1 file changed, 14 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml > > > index beeb90e55727..d8a6500e5840 100644 > > > --- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml > > > +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml > > > @@ -26,6 +26,7 @@ properties: > > > - const: allwinner,sun50i-a64-rtc > > > - const: allwinner,sun8i-h3-rtc > > > - const: allwinner,sun50i-h6-rtc > > > + - const: allwinner,sun50i-h616-rtc > > > > > > reg: > > > maxItems: 1 > > > @@ -104,6 +105,19 @@ allOf: > > > minItems: 3 > > > maxItems: 3 > > > > > > + - if: > > > + properties: > > > + compatible: > > > + contains: > > > + const: allwinner,sun50i-h616-rtc > > > + > > > + then: > > > + properties: > > > + clock-output-names: > > > + minItems: 3 > > > + maxItems: 3 > > > > You don't need both of them when they are equal > > > > > + clocks: false > > > + > > > > It's not entirely clear to me what those clocks are about though. If we > > look at the clock output in the user manual, it looks like there's only > > two clocks that are actually being output: the 32k "fanout" clock and > > the losc. What are the 3 you're talking about?] > > I see three: the raw SYSTEM "CLK32K_LOSC", the RTC input + debounce > clock (/32), and the multiplexed PAD. But the input and debounce clock is only for the RTC itself right? So it should be local to the driver and doesn't need to be made available to the other drivers Either way, what this list is must be documented. > > Also, it looks like the 32k fanout clock needs at least the hosc or > > pll-periph in input, so we probably don't want to ask for no parent > > clock? > > Well, we never seem to reference the HOSC this way, this was always > somewhat explicit. And yes, there is PLL-PERIPH as an input, but we > don't support this yet. So I went with 0 input clocks *for now*: the > driver can then ignore all clocks, so any clock referenced in the DT > later won't cause any harm. This will all be addressed by Samuel's RTC > clock patch, which will also touch the H6, IIRC. And it looks like we > will need to touch the binding anyway then, but can then just *extend* > this. You mentioned that series several times already and never provided an explanation for what it was supposed to be doing except fixing everything. What's the general plan for that series? Maxime
Attachment:
signature.asc
Description: PGP signature
