From: Kever Yang <kever.yang@xxxxxxxxxxxxxx> rk3288 has two kind of usb controller; this adds the ehci variant for host0 and hsic. At the moment we don't add any phys for these controllers, but the default settings seem to work OK. There is a hardware problem in ohci controller which make it unavailable and host0 controller can only support high-speed devices. Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> --- Changes in v2: - Kever is now the author - Node is now named usb arch/arm/boot/dts/rk3288.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 3ef8951..e7cb008 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -251,6 +251,26 @@ status = "disabled"; }; + usb_host0_ehci: usb@ff500000 { + compatible = "generic-ehci"; + reg = <0xff500000 0x100>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USBHOST0>; + clock-names = "usbhost"; + status = "disabled"; + }; + + /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + + usb_hsic: usb@ff5c0000 { + compatible = "generic-ehci"; + reg = <0xff5c0000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HSIC>; + clock-names = "usbhost"; + status = "disabled"; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; -- 2.0.0.526.g5318336 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html