On 07/30/2014 07:18 PM, Sergei Shtylyov wrote:
rk3288 has two kind of usb controller, this add the dwc2 controller
for otg and host1.
Controller can works with usb PHY default setting and Vbus on.
Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/rk3288.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index abc51f5..4309c4f 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -646,5 +646,25 @@
clock-names = "baudclk", "apb_pclk";
status = "disabled";
};
+
+ usb_otg: dwc2@ff580000 {
The ePAPR standard [1] says:
The name of a node should be somewhat generic, reflecting the function of the
device and not its precise programming model. If appropriate, the name should
be one of the following choices:
[...]
• usb
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0xff580000 0x40000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG0>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
+ usb_host1: dwc2@ff540000 {
Same here.
Oops, forgot to give the ePAPR link:
[1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
