[PATCH v2] arm64: dts: qcom: sc7280: Add WPSS remoteproc node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the WPSS remoteproc node in dts for
PIL loading.

Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts |  4 +++
 arch/arm64/boot/dts/qcom/sc7280.dtsi    | 57 +++++++++++++++++++++++++++++++++
 2 files changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 64fc22a..2b8bbcd 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -68,3 +68,7 @@
 		qcom,pre-scaling = <1 1>;
 	};
 };
+
+&remoteproc_wpss {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 53a21d0..41a7826 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -74,6 +74,16 @@
 			reg = <0 0x8b700000 0 0x10000>;
 			no-map;
 		};
+
+		wlan_fw_mem: memory@80c00000 {
+			no-map;
+			reg = <0x0 0x80c00000 0x0 0xc00000>;
+		};
+
+		wpss_mem: memory@9ae00000 {
+			no-map;
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+		};
 	};
 
 	cpus {
@@ -1270,6 +1280,53 @@
 			};
 		};
 
+		remoteproc_wpss: remoteproc@8a00000 {
+			compatible = "qcom,sc7280-wpss-pil";
+			reg = <0 0x08a00000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 0 IRQ_TYPE_NONE>,
+					      <&wpss_smp2p_in 1 IRQ_TYPE_NONE>,
+					      <&wpss_smp2p_in 2 IRQ_TYPE_NONE>,
+					      <&wpss_smp2p_in 3 IRQ_TYPE_NONE>,
+					      <&wpss_smp2p_in 7 IRQ_TYPE_NONE>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+				 <&gcc GCC_WPSS_AHB_CLK>,
+				 <&gcc GCC_WPSS_RSCP_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "gcc_wpss_ahb_bdg_mst_clk",
+				      "gcc_wpss_ahb_clk",
+				      "gcc_wpss_rscp_clk",
+				      "xo";
+
+			memory-region = <&wpss_mem>;
+
+			qcom,smem-states = <&wpss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+			reset-names = "restart", "pdc_sync";
+
+			qcom,halt-regs = <&tcsr_mutex_regs 0x37000>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_WPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "wpss";
+				qcom,remote-pid = <13>;
+			};
+		};
+
 		usb_2: usb@8cf8800 {
 			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
 			reg = <0 0x08cf8800 0 0x400>;
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux