Hi Florian, > -----Original Message----- > From: Florian Fainelli <f.fainelli@xxxxxxxxx> > Sent: 2021年8月10日 2:40 > To: Joakim Zhang <qiangqing.zhang@xxxxxxx>; davem@xxxxxxxxxxxxx; > kuba@xxxxxxxxxx; robh+dt@xxxxxxxxxx; shawnguo@xxxxxxxxxx; > s.hauer@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; andrew@xxxxxxx > Cc: kernel@xxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; > netdev@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; > linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Subject: Re: [PATCH net-next 1/3] dt-bindings: net: fsl, fec: add "fsl, > wakeup-irq" property > > > > On 8/8/2021 10:08 PM, Joakim Zhang wrote: > > > > Hi Florian, > > > >> -----Original Message----- > >> From: Florian Fainelli <f.fainelli@xxxxxxxxx> > >> Sent: 2021年8月5日 17:18 > >> To: Joakim Zhang <qiangqing.zhang@xxxxxxx>; davem@xxxxxxxxxxxxx; > >> kuba@xxxxxxxxxx; robh+dt@xxxxxxxxxx; shawnguo@xxxxxxxxxx; > >> s.hauer@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; andrew@xxxxxxx > >> Cc: kernel@xxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; > >> netdev@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; > >> linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > >> Subject: Re: [PATCH net-next 1/3] dt-bindings: net: fsl, fec: add > >> "fsl, wakeup-irq" property > >> > >> > >> > >> On 8/5/2021 12:46 AM, Joakim Zhang wrote: > >>> Add "fsl,wakeup-irq" property for FEC controller to select wakeup > >>> irq source. > >>> > >>> Signed-off-by: Fugang Duan <fugang.duan@xxxxxxx> > >>> Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx> > >> > >> Why are not you making use of the standard interrupts-extended > >> property which allows different interrupt lines to be originating > >> from different interrupt controllers, e.g.: > >> > >> interrupts-extended = <&gic GIC_SPI 112 4>, <&wakeup_intc 0>; > > > > Thanks. > > > > AFAIK, interrupts-extended should be used instead of interrupts when a > > device is connected to multiple interrupt controllers as it encodes a > > parent phandle with each interrupt specifier. However, for FEC controller, all > interrupt lines are originating from the same interrupt controllers. > > OK, so why this custom property then? > > > > > 1) FEC controller has up to 4 interrupt lines and all of these are routed to GIC > interrupt controller. > > 2) FEC has a wakeup interrupt signal and always are mixed with other > interrupt signals, and then output to one interrupt line. > > 3) For legacy SoCs, wakeup interrupt are mixed to int0 line, but for i.MX8M > serials, are mixed to int2 line. > > 4) Now driver treat int0 as the wakeup source by default, it is broken for > i.MX8M. > > I don't really know what to make of your response, it seems to me that you are > carrying some legacy Device Tree properties that were invented when > interrupts-extended did not exist and we did not know any better. As I described in former mail, it is not related to interrupts-extended property. Let's take a look, e.g. 1) arch/arm/boot/dts/imx7d.dtsi interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "int0", "int1", "int2", "pps"; For these 4 interrupts are originating from GIC interrupt controller, "int0" for queue 0 and other interrupt signals, containing wakeup; "int1" for queue 1; "int2" for queue 2. 2) arch/arm64/boot/dts/freescale/imx8mq.dtsi interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "int0", "int1", "int2", "pps"; For these 4 interrupts are also originating from GIC interrupt controller, "int0" for queue 0; "int1" for queue 1; "int2" for queue 2 and other interrupt signals, containing wakeup. If we want to use WoL feature, we need invoke enable_irq_wake() to let this specific interrupt line be a wakeup source. For FEC driver now, it treats "int0" as wakeup interrupt by default. Obviously it's not fine for i.MX8M serials, since SoC mix wakeup interrupt signal into "int2", so I add this "fsl,wakeup-irq" custom property to indicate which interrupt line contains wakeup signal. Not sure if I have explained it clearly enough, from my point of view, I think interrupts-extended property can't fix this issue, right? If there is any common properties can be used for it, please let me know. Or any other better solutions also be appreciated. Thanks. Best Regards, Joakim Zhang > -- > Florian
