On Wed, Aug 4, 2021 at 4:32 PM Raag Jadav <raagjadav@xxxxxxxxx> wrote: > > ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2] > eeproms respectively. Both are 4Kb (512 bytes) in size, > and compatible with AT24C04[3]. > Remove multi-address entries, as both the boards have a single chip each. > > [1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf > [2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf > [3] https://ww1.microchip.com/downloads/en/DeviceDoc/doc0180.pdf > > Signed-off-by: Raag Jadav <raagjadav@xxxxxxxxx> Acked-by: Li Yang <leoyang.li@xxxxxxx> > --- > arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 8 +------- > arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 7 +------ > 2 files changed, 2 insertions(+), 13 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > index db3d303..6d22efb 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > @@ -83,15 +83,9 @@ > }; > > eeprom@52 { > - compatible = "atmel,24c512"; > + compatible = "onnn,cat24c04", "atmel,24c04"; > reg = <0x52>; > }; > - > - eeprom@53 { > - compatible = "atmel,24c512"; > - reg = <0x53>; > - }; > - > }; > }; > }; > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > index 60acdf0..7025aad 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts > @@ -59,14 +59,9 @@ > }; > > eeprom@52 { > - compatible = "atmel,24c512"; > + compatible = "onnn,cat24c05", "atmel,24c04"; > reg = <0x52>; > }; > - > - eeprom@53 { > - compatible = "atmel,24c512"; > - reg = <0x53>; > - }; > }; > > &i2c3 { > -- > 2.7.4 >
