On Wed, 4 Aug 2021 at 12:58, Rajendra Nayak <rnayak@xxxxxxxxxxxxxx> wrote:
>
> Some devices within power domains with performance states do not
> support DVFS, but still need to vote on a default/static state
> while they are active. They can express this using the 'required-opps'
> property in device tree, which points to the phandle of the OPP
> supported by the corresponding power-domains.
>
> Add support to parse this information from DT and then set the
> specified performance state during attach and drop it on detach.
> runtime suspend/resume callbacks already have logic to drop/set
> the vote as needed and should take care of dropping the default
> perf state vote on runtime suspend and restore it back on runtime
> resume.
>
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> ---
> drivers/base/power/domain.c | 28 ++++++++++++++++++++++++++--
> include/linux/pm_domain.h | 1 +
> 2 files changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
> index a934c67..b9b5a9b 100644
> --- a/drivers/base/power/domain.c
> +++ b/drivers/base/power/domain.c
> @@ -2598,6 +2598,12 @@ static void genpd_dev_pm_detach(struct device *dev, bool power_off)
>
> dev_dbg(dev, "removing from PM domain %s\n", pd->name);
>
> + /* Drop the default performance state */
> + if (dev_gpd_data(dev)->default_pstate) {
> + dev_pm_genpd_set_performance_state(dev, 0);
> + dev_gpd_data(dev)->default_pstate = 0;
> + }
> +
> for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) {
> ret = genpd_remove_device(pd, dev);
> if (ret != -EAGAIN)
> @@ -2637,6 +2643,8 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
> {
> struct of_phandle_args pd_args;
> struct generic_pm_domain *pd;
> + struct device_node *np;
> + int pstate;
> int ret;
>
> ret = of_parse_phandle_with_args(dev->of_node, "power-domains",
> @@ -2675,10 +2683,26 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
> genpd_unlock(pd);
> }
>
> - if (ret)
> + if (ret) {
> genpd_remove_device(pd, dev);
> + return -EPROBE_DEFER;
> + }
> +
> + /* Set the default performance state */
> + np = dev->of_node;
> + if (of_parse_phandle(np, "required-opps", index)) {
Looks like Viresh thinks it's a good idea to drop the error print in
of_get_required_opp_performance_state() when there is no
"required-opps" specifier.
Would you mind folding in a patch for that in the series, so this code
can be simplified according to our earlier discussions?
> + pstate = of_get_required_opp_performance_state(np, index);
> + if (pstate < 0) {
> + ret = pstate;
> + dev_err(dev, "failed to set required performance state for power-domain %s: %d\n",
> + pd->name, ret);
> + } else {
> + dev_pm_genpd_set_performance_state(dev, pstate);
> + dev_gpd_data(dev)->default_pstate = pstate;
> + }
> + }
>
> - return ret ? -EPROBE_DEFER : 1;
> + return ret ? ret : 1;
> }
>
> /**
> diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
> index 21a0577..67017c9 100644
> --- a/include/linux/pm_domain.h
> +++ b/include/linux/pm_domain.h
> @@ -198,6 +198,7 @@ struct generic_pm_domain_data {
> struct notifier_block *power_nb;
> int cpu;
> unsigned int performance_state;
> + unsigned int default_pstate;
> unsigned int rpm_pstate;
> ktime_t next_wakeup;
> void *data;
Other than the above, this looks good to me!
Kind regards
Uffe
