The i.MX7 has two possible Flex Timers, disabled by default. Moreover, the
block is the same as LS1021a, then the drivers can be used as-is.
Signed-off-by: Thomas Perrot <thomas.perrot@xxxxxxxxxxx>
---
arch/arm/boot/dts/imx7s.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index a22d41e0cf31..1843fc053870 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -707,6 +707,34 @@ ecspi4: spi@30630000 {
status = "disabled";
};
+ ftm1: pwm@30640000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ reg = <0x30640000 0x10000>;
+ #pwm-cells = <3>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ ftm2: pwm@30650000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ reg = <0x30650000 0x10000>;
+ #pwm-cells = <3>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
+ status = "disabled";
+ };
+
pwm1: pwm@30660000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
--
2.31.1
