On Wed, 28 Jul 2021 at 23:38, <rentao.bupt@xxxxxxxxx> wrote:
>
> From: Tao Ren <rentao.bupt@xxxxxxxxx>
>
> Add initial version of device tree for Facebook Fuji (AST2600) BMC.
I like to read what kind of platform the BMC is going into if you can
add that detail, but it's not essential.
> +&spi1 {
> + status = "okay";
> +
> + /*
> + * Customize spi1 flash memory size to 32MB (maximum flash size on
> + * the bus) to save vmalloc space.
> + */
> + reg = < 0x1e630000 0xc4
> + 0x30000000 0x2000000 >;
Which driver supports this?
It would be great to see Facebook work to get the SPI NOR driver for
the ast2600 merged to mainline.
I doubt the IBM team will get to this, as we are using eMMC instead.
> +
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "spi1.0";
> + spi-max-frequency = <5000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + flash1@0 {
> + reg = <0x0 0x2000000>;
> + label = "system-flash";
> + };
> + };
> + };
> +};
> +&ehci1 {
> + status = "okay";
> +};
Have you verified that USB works with mainline? I've had reports of it
working on 5.8 but it seems to have regressed as of v5.10.
> +&mdio1 {
> + status = "okay";
> +
> + ethphy3: ethernet-phy@13 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0d>;
> + };
> +};
> +
> +&mac3 {
> + phy-handle = <ðphy3>;
status = okay?
You should specify the pinmux too I think, even if the default happens
to work, so that other devices cannot claim the pins.
Cheers,
Joel
