Hi Michael,
Could you add a commit message to all patches in this serie?
On 8/4/21 3:06 PM, Michael Riesch wrote:
> Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
> ---
> v2:
> - rename alias to match convention
>
> arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> index ed96f27c64a3..c4da6436059d 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> @@ -17,6 +17,7 @@
> ethernet0 = &gmac0;
> ethernet1 = &gmac1;
> mmc0 = &sdhci;
> + mmc1 = &sdmmc0;
mmc aliases are sort on reg address based on availability without number
gap.
sdmmc0: mmc@fe2b0000 {}
sdhci: mmc@fe310000 {}
> };
>
> chosen: chosen {
> @@ -353,6 +354,20 @@
> status = "okay";
> };
>
> +&sdmmc0 {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
pinctrl-names below pinctrl-0 like the rest of rk356x.dtsi
> + sd-uhs-sdr104;
> + supports-sd;
Check mmc-controller.yaml, rockchip-dw-mshc.yaml and
synopsys-dw-mshc-common.yaml for properties.
> + vmmc-supply = <&vcc3v3_sd>;
> + vqmmc-supply = <&vccio_sd>;
> + status = "okay";
> +};
> +
> &uart2 {
> status = "okay";
> };
>
