On Tue, Aug 3, 2021 at 11:16 PM Lee Jones <lee.jones@xxxxxxxxxx> wrote: > > On Tue, 03 Aug 2021, Alistair Francis wrote: > > > Initial support for the Silergy SY7636A Power Management chip. > > > > Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx> > > --- > > drivers/mfd/Kconfig | 9 +++++ > > drivers/mfd/Makefile | 1 + > > drivers/mfd/sy7636a.c | 72 +++++++++++++++++++++++++++++++++++++ > > include/linux/mfd/sy7636a.h | 45 +++++++++++++++++++++++ > > 4 files changed, 127 insertions(+) > > create mode 100644 drivers/mfd/sy7636a.c > > create mode 100644 include/linux/mfd/sy7636a.h > > > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > > index 6a3fd2d75f96..b82208f0c79c 100644 > > --- a/drivers/mfd/Kconfig > > +++ b/drivers/mfd/Kconfig > > @@ -1352,6 +1352,15 @@ config MFD_SYSCON > > Select this option to enable accessing system control registers > > via regmap. > > > > +config MFD_SY7636A > > + tristate "Silergy SY7636A Power Management IC" > > + select MFD_CORE > > + select REGMAP_I2C > > + depends on I2C > > + help > > + Select this option to enable support for the Silergy SY7636A > > + Power Management IC. > > + > > config MFD_DAVINCI_VOICECODEC > > tristate > > select MFD_CORE > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > > index 8116c19d5fd4..cbe581e87fa9 100644 > > --- a/drivers/mfd/Makefile > > +++ b/drivers/mfd/Makefile > > @@ -266,6 +266,7 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o > > obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o > > obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o > > > > +obj-$(CONFIG_MFD_SY7636A) += sy7636a.o > > obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o > > obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o > > obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o > > diff --git a/drivers/mfd/sy7636a.c b/drivers/mfd/sy7636a.c > > new file mode 100644 > > index 000000000000..f3ff93c7395d > > --- /dev/null > > +++ b/drivers/mfd/sy7636a.c > > @@ -0,0 +1,72 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * MFD parent driver for SY7636A chip > > + * > > + * Copyright (C) 2021 reMarkable AS - http://www.remarkable.com/ > > + * > > + * Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@xxxxxxxxxxxxxx> > > + * Alistair Francis <alistair@xxxxxxxxxxxxx> > > + * > > + * Based on the lp87565 driver by Keerthy <j-keerthy@xxxxxx> > > + */ > > + > > +#include <linux/interrupt.h> > > +#include <linux/mfd/core.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > + > > +#include <linux/mfd/sy7636a.h> > > + > > +static const struct regmap_config sy7636a_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > +}; > > + > > +static const struct mfd_cell sy7636a_cells[] = { > > + { .name = "sy7636a-regulator", }, > > What kind of regulator is 'vcom'? LDO? DCDC? Both I guess: "SY7636A is a single-chip power management IC (PMIC) designed for electronic paper display (EPD) applications. The device supports panel sizes up to 9.7 inches and larger. The device integrates two high-efficiency DC-DC boost converters, which are boosted to 25V and -20V by two charge pumps to provide gate driver power for the panel. Two tracking LDOs create a ±15V source driver power supply that supports output currents up to 200mA. SY7636A also provides I2C interface control for specific panel requirements" Alistair > > > + { .name = "sy7636a-temperature", }, > > + { .name = "sy7636a-thermal", }, > > +}; > > -- > Lee Jones [李琼斯] > Senior Technical Lead - Developer Services > Linaro.org │ Open source software for Arm SoCs > Follow Linaro: Facebook | Twitter | Blog
