Hi Rob, It follows the DT bindings for Kirin 970 PCIE and its corresponding PHY, rebased on the top of next-20210803. It should apply cleanly on the top of: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/log/?h=dt/next Note: you mentioned that patch 1 was already applied, but it is not there yet. I opted to keep it at the tree, in case someone wants to apply this series on the top of linux-next. v4: - Rebased and fixed a merge conflict v3: - Fixed a comment on patch 3: The Ethernet controller is at lane 6. v2: - removed the DTS file. I'll submit it in separate, once having everything else merged; - it now doesn't produce any warnings with: make DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/hisilicon,kirin -pcie.yaml DT_CHECKER_FLAGS=-m dt_binding_check - added the upstream node; - the clock enable now uses a new property (hisilicon,clken-gpios); - the reg for the PCI devices are now properly filled; - the pcie@x,y nodes now match the port number from table 4-1 from the datasheet. Mauro Carvalho Chehab (4): dt-bindings: PCI: kirin: Fix compatible string dt-bindings: PCI: kirin: Convert kirin-pcie.txt to yaml dt-bindings: PCI: kirin: Add support for Kirin970 dt-bindings: phy: Add bindings for HiKey 970 PCIe PHY .../bindings/pci/hisilicon,kirin-pcie.yaml | 160 ++++++++++++++++++ .../devicetree/bindings/pci/kirin-pcie.txt | 50 ------ .../devicetree/bindings/pci/snps,dw-pcie.yaml | 2 +- .../phy/hisilicon,phy-hi3670-pcie.yaml | 82 +++++++++ MAINTAINERS | 2 +- 5 files changed, 244 insertions(+), 52 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml delete mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml -- 2.31.1
