[PATCH 1/3] ARM: dts: Turn on USB host vbus on rk3288-evb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




There is no phy driver that works on the Rockchip board for either USB
host port yet.  For now just hardcode the vbus signal to be on all the
time which makes both the dwc2 host and the EHCI port work.

Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/rk3288-evb.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 749e20d..efd625e 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -35,6 +35,18 @@
 			debounce-interval = <100>;
 		};
 	};
+
+	/* This turns on vbus for both host0 (ehci) and host1 (dwc2) */
+	usb_host_vbus_regulator: usb-host-vbus-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_vbus>;
+		regulator-name = "usb-host-vbus";
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &i2c0 {
@@ -71,4 +83,10 @@
 			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	usb-host {
+		usb_host_vbus: usb-host-vbus {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
-- 
2.0.0.526.g5318336

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux