Intel processors provide access for various services designed to support
processor and DRAM thermal management, platform manageability and
processor interface tuning and diagnostics.
Those services are available via the Platform Environment Control
Interface (PECI) that provides a communication channel between the
processor and the Baseboard Management Controller (BMC) or other
platform management device.
This change introduces PECI subsystem by adding the initial core module
and API for controller drivers.
Co-developed-by: Jason M Bills <jason.m.bills@xxxxxxxxxxxxxxx>
Signed-off-by: Jason M Bills <jason.m.bills@xxxxxxxxxxxxxxx>
Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
Signed-off-by: Iwona Winiarska <iwona.winiarska@xxxxxxxxx>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
---
MAINTAINERS | 9 +++
drivers/Kconfig | 3 +
drivers/Makefile | 1 +
drivers/peci/Kconfig | 15 ++++
drivers/peci/Makefile | 5 ++
drivers/peci/core.c | 155 ++++++++++++++++++++++++++++++++++++++++
drivers/peci/internal.h | 16 +++++
include/linux/peci.h | 99 +++++++++++++++++++++++++
8 files changed, 303 insertions(+)
create mode 100644 drivers/peci/Kconfig
create mode 100644 drivers/peci/Makefile
create mode 100644 drivers/peci/core.c
create mode 100644 drivers/peci/internal.h
create mode 100644 include/linux/peci.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 7cdab7229651..d411974aaa5e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14503,6 +14503,15 @@ L: platform-driver-x86@xxxxxxxxxxxxxxx
S: Maintained
F: drivers/platform/x86/peaq-wmi.c
+PECI SUBSYSTEM
+M: Iwona Winiarska <iwona.winiarska@xxxxxxxxx>
+R: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
+L: openbmc@xxxxxxxxxxxxxxxx (moderated for non-subscribers)
+S: Supported
+F: Documentation/devicetree/bindings/peci/
+F: drivers/peci/
+F: include/linux/peci.h
+
PENSANDO ETHERNET DRIVERS
M: Shannon Nelson <snelson@xxxxxxxxxxx>
M: drivers@xxxxxxxxxxx
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 8bad63417a50..f472b3d972b3 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -236,4 +236,7 @@ source "drivers/interconnect/Kconfig"
source "drivers/counter/Kconfig"
source "drivers/most/Kconfig"
+
+source "drivers/peci/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 27c018bdf4de..8d96f0c3dde5 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -189,3 +189,4 @@ obj-$(CONFIG_GNSS) += gnss/
obj-$(CONFIG_INTERCONNECT) += interconnect/
obj-$(CONFIG_COUNTER) += counter/
obj-$(CONFIG_MOST) += most/
+obj-$(CONFIG_PECI) += peci/
diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig
new file mode 100644
index 000000000000..71a4ad81225a
--- /dev/null
+++ b/drivers/peci/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menuconfig PECI
+ tristate "PECI support"
+ help
+ The Platform Environment Control Interface (PECI) is an interface
+ that provides a communication channel to Intel processors and
+ chipset components from external monitoring or control devices.
+
+ If you are building a Baseboard Management Controller (BMC) kernel
+ for Intel platform say Y here and also to the specific driver for
+ your adapter(s) below. If unsure say N.
+
+ This support is also available as a module. If so, the module
+ will be called peci.
diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile
new file mode 100644
index 000000000000..e789a354e842
--- /dev/null
+++ b/drivers/peci/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# Core functionality
+peci-y := core.o
+obj-$(CONFIG_PECI) += peci.o
diff --git a/drivers/peci/core.c b/drivers/peci/core.c
new file mode 100644
index 000000000000..7b3938af0396
--- /dev/null
+++ b/drivers/peci/core.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2018-2021 Intel Corporation
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/peci.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+#include "internal.h"
+
+static DEFINE_IDA(peci_controller_ida);
+
+static void peci_controller_dev_release(struct device *dev)
+{
+ struct peci_controller *controller = to_peci_controller(dev);
+
+ pm_runtime_disable(&controller->dev);
+
+ mutex_destroy(&controller->bus_lock);
+ ida_free(&peci_controller_ida, controller->id);
+ fwnode_handle_put(controller->dev.fwnode);
+ kfree(controller);
+}
+
+struct device_type peci_controller_type = {
+ .release = peci_controller_dev_release,
+};
+
+static struct peci_controller *peci_controller_alloc(struct device *dev,
+ struct peci_controller_ops *ops)
+{
+ struct fwnode_handle *node = fwnode_handle_get(dev_fwnode(dev));
+ struct peci_controller *controller;
+ int ret;
+
+ if (!ops->xfer)
+ return ERR_PTR(-EINVAL);
+
+ controller = kzalloc(sizeof(*controller), GFP_KERNEL);
+ if (!controller)
+ return ERR_PTR(-ENOMEM);
+
+ ret = ida_alloc_max(&peci_controller_ida, U8_MAX, GFP_KERNEL);
+ if (ret < 0)
+ goto err;
+ controller->id = ret;
+
+ controller->ops = ops;
+
+ controller->dev.parent = dev;
+ controller->dev.bus = &peci_bus_type;
+ controller->dev.type = &peci_controller_type;
+ controller->dev.fwnode = node;
+ controller->dev.of_node = to_of_node(node);
+
+ device_initialize(&controller->dev);
+
+ mutex_init(&controller->bus_lock);
+
+ pm_runtime_no_callbacks(&controller->dev);
+ pm_suspend_ignore_children(&controller->dev, true);
+ pm_runtime_enable(&controller->dev);
+
+ return controller;
+
+err:
+ kfree(controller);
+ return ERR_PTR(ret);
+}
+
+static void unregister_controller(void *_controller)
+{
+ struct peci_controller *controller = _controller;
+
+ device_unregister(&controller->dev);
+}
+
+/**
+ * devm_peci_controller_add() - add PECI controller
+ * @dev: device for devm operations
+ * @ops: pointer to controller specific methods
+ *
+ * In final stage of its probe(), peci_controller driver calls
+ * devm_peci_controller_add() to register itself with the PECI bus.
+ *
+ * Return: Pointer to the newly allocated controller or ERR_PTR() in case of failure.
+ */
+struct peci_controller *devm_peci_controller_add(struct device *dev,
+ struct peci_controller_ops *ops)
+{
+ struct peci_controller *controller;
+ int ret;
+
+ controller = peci_controller_alloc(dev, ops);
+ if (IS_ERR(controller))
+ return controller;
+
+ ret = dev_set_name(&controller->dev, "peci-%d", controller->id);
+ if (ret)
+ goto err;
+
+ ret = device_add(&controller->dev);
+ if (ret)
+ goto err;
+
+ ret = devm_add_action_or_reset(dev, unregister_controller, controller);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return controller;
+
+err:
+ put_device(&controller->dev);
+
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_NS_GPL(devm_peci_controller_add, PECI);
+
+struct bus_type peci_bus_type = {
+ .name = "peci",
+};
+
+static int __init peci_init(void)
+{
+ int ret;
+
+ ret = bus_register(&peci_bus_type);
+ if (ret < 0) {
+ pr_err("failed to register PECI bus type!\n");
+ return ret;
+ }
+
+ return 0;
+}
+module_init(peci_init);
+
+static void __exit peci_exit(void)
+{
+ bus_unregister(&peci_bus_type);
+}
+module_exit(peci_exit);
+
+MODULE_AUTHOR("Jason M Bills <jason.m.bills@xxxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@xxxxxxxxx>");
+MODULE_DESCRIPTION("PECI bus core module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h
new file mode 100644
index 000000000000..918dea745a86
--- /dev/null
+++ b/drivers/peci/internal.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2018-2021 Intel Corporation */
+
+#ifndef __PECI_INTERNAL_H
+#define __PECI_INTERNAL_H
+
+#include <linux/device.h>
+#include <linux/types.h>
+
+struct peci_controller;
+
+extern struct bus_type peci_bus_type;
+
+extern struct device_type peci_controller_type;
+
+#endif /* __PECI_INTERNAL_H */
diff --git a/include/linux/peci.h b/include/linux/peci.h
new file mode 100644
index 000000000000..26e0a4e73b50
--- /dev/null
+++ b/include/linux/peci.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2018-2021 Intel Corporation */
+
+#ifndef __LINUX_PECI_H
+#define __LINUX_PECI_H
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+/*
+ * Currently we don't support any PECI command over 32 bytes.
+ */
+#define PECI_REQUEST_MAX_BUF_SIZE 32
+
+struct peci_controller;
+struct peci_request;
+
+/**
+ * struct peci_controller_ops - PECI controller specific methods
+ * @xfer: PECI transfer function
+ *
+ * PECI controllers may have different hardware interfaces - the drivers
+ * implementing PECI controllers can use this structure to abstract away those
+ * differences by exposing a common interface for PECI core.
+ */
+struct peci_controller_ops {
+ int (*xfer)(struct peci_controller *controller, u8 addr, struct peci_request *req);
+};
+
+/**
+ * struct peci_controller - PECI controller
+ * @dev: device object to register PECI controller to the device model
+ * @ops: pointer to device specific controller operations
+ * @bus_lock: lock used to protect multiple callers
+ * @id: PECI controller ID
+ *
+ * PECI controllers usually connect to their drivers using non-PECI bus,
+ * such as the platform bus.
+ * Each PECI controller can communicate with one or more PECI devices.
+ */
+struct peci_controller {
+ struct device dev;
+ struct peci_controller_ops *ops;
+ struct mutex bus_lock; /* held for the duration of xfer */
+ u8 id;
+};
+
+struct peci_controller *devm_peci_controller_add(struct device *parent,
+ struct peci_controller_ops *ops);
+
+static inline struct peci_controller *to_peci_controller(void *d)
+{
+ return container_of(d, struct peci_controller, dev);
+}
+
+/**
+ * struct peci_device - PECI device
+ * @dev: device object to register PECI device to the device model
+ * @controller: manages the bus segment hosting this PECI device
+ * @addr: address used on the PECI bus connected to the parent controller
+ *
+ * A peci_device identifies a single device (i.e. CPU) connected to a PECI bus.
+ * The behaviour exposed to the rest of the system is defined by the PECI driver
+ * managing the device.
+ */
+struct peci_device {
+ struct device dev;
+ u8 addr;
+};
+
+static inline struct peci_device *to_peci_device(struct device *d)
+{
+ return container_of(d, struct peci_device, dev);
+}
+
+/**
+ * struct peci_request - PECI request
+ * @device: PECI device to which the request is sent
+ * @tx: TX buffer specific data
+ * @tx.buf: TX buffer
+ * @tx.len: transfer data length in bytes
+ * @rx: RX buffer specific data
+ * @rx.buf: RX buffer
+ * @rx.len: received data length in bytes
+ *
+ * A peci_request represents a request issued by PECI originator (TX) and
+ * a response received from PECI responder (RX).
+ */
+struct peci_request {
+ struct peci_device *device;
+ struct {
+ u8 buf[PECI_REQUEST_MAX_BUF_SIZE];
+ u8 len;
+ } rx, tx;
+};
+
+#endif /* __LINUX_PECI_H */
--
2.31.1
