>From testing on hardware the poll_enable_time isn't required and
sometimes causes the driver probe to fail so let's remove it.
Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx>
---
drivers/regulator/sy7636a-regulator.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c
index e021ae08cbaa..c3b34cac8c7f 100644
--- a/drivers/regulator/sy7636a-regulator.c
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -13,8 +13,6 @@
#include <linux/gpio/consumer.h>
#include <linux/mfd/sy7636a.h>
-#define SY7636A_POLL_ENABLED_TIME 500
-
static int sy7636a_get_vcom_voltage_op(struct regulator_dev *rdev)
{
int ret;
@@ -61,7 +59,6 @@ static const struct regulator_desc desc = {
.owner = THIS_MODULE,
.enable_reg = SY7636A_REG_OPERATION_MODE_CRL,
.enable_mask = SY7636A_OPERATION_MODE_CRL_ONOFF,
- .poll_enabled_time = SY7636A_POLL_ENABLED_TIME,
.regulators_node = of_match_ptr("regulators"),
.of_match = of_match_ptr("vcom"),
};
--
2.31.1
