Hi Rob,
That's the third version of the DT bindings for Kirin 970 PCIE and its
corresponding PHY.
It is identical to v2, except by:
- pcie@7,0 { // Lane 7: Ethernet
+ pcie@7,0 { // Lane 6: Ethernet
at Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
IMO, the best would be to merge this series via your tree, as it
depends on the patch converting the DT bindings for the PCIe DWC
driver.
v3:
- Fixed a comment on patch 3: The Ethernet controller is at lane 6.
v2:
- removed the DTS file. I'll submit it in separate, once having
everything else merged;
- it now doesn't produce any warnings with:
make DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/hisilicon,kirin
-pcie.yaml DT_CHECKER_FLAGS=-m dt_binding_check
- added the upstream node;
- the clock enable now uses a new property (hisilicon,clken-gpios);
- the reg for the PCI devices are now properly filled;
- the pcie@x,y nodes now match the port number from table 4-1 from the
datasheet.
Mauro Carvalho Chehab (4):
dt-bindings: PCI: kirin: Fix compatible string
dt-bindings: PCI: kirin: Convert kirin-pcie.txt to yaml
dt-bindings: PCI: kirin: Add support for Kirin970
dt-bindings: phy: Add bindings for HiKey 970 PCIe PHY
.../bindings/pci/hisilicon,kirin-pcie.yaml | 160 ++++++++++++++++++
.../devicetree/bindings/pci/kirin-pcie.txt | 50 ------
.../devicetree/bindings/pci/snps,dw-pcie.yaml | 2 +-
.../phy/hisilicon,phy-hi3670-pcie.yaml | 86 ++++++++++
MAINTAINERS | 2 +-
5 files changed, 248 insertions(+), 52 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
delete mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt
create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
--
2.31.1
