Re: [PATCH v7 3/6] hwmon: sy7636a: Add temperature driver for sy7636a

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 21, 2021 at 12:59 AM Lee Jones <lee.jones@xxxxxxxxxx> wrote:
>
> On Thu, 08 Jul 2021, Alistair Francis wrote:
>
> > This is a multi-function device to interface with the sy7636a
> > EPD PMIC chip from Silergy.
> >
> > Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx>
> > ---
> >  arch/arm/configs/imx_v6_v7_defconfig |   1 +
> >  drivers/hwmon/Kconfig                |  10 +++
> >  drivers/hwmon/Makefile               |   1 +
> >  drivers/hwmon/sy7636a-hwmon.c        | 106 +++++++++++++++++++++++++++
> >  4 files changed, 118 insertions(+)
> >  create mode 100644 drivers/hwmon/sy7636a-hwmon.c
> >
> > diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
> > index cd80e85d37cf..e9c0be5629c6 100644
> > --- a/arch/arm/configs/imx_v6_v7_defconfig
> > +++ b/arch/arm/configs/imx_v6_v7_defconfig
> > @@ -227,6 +227,7 @@ CONFIG_RN5T618_POWER=m
> >  CONFIG_SENSORS_MC13783_ADC=y
> >  CONFIG_SENSORS_GPIO_FAN=y
> >  CONFIG_SENSORS_IIO_HWMON=y
> > +CONFIG_SENSORS_SY7636A=y
> >  CONFIG_THERMAL_STATISTICS=y
> >  CONFIG_THERMAL_WRITABLE_TRIPS=y
> >  CONFIG_CPU_THERMAL=y
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index e3675377bc5d..6cae12de59cd 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -1631,6 +1631,16 @@ config SENSORS_SIS5595
> >         This driver can also be built as a module. If so, the module
> >         will be called sis5595.
> >
> > +config SENSORS_SY7636A
> > +     tristate "Silergy SY7636A"
> > +     depends on I2C
> > +     help
> > +       If you say yes here you get support for the thermistor readout of
> > +       the Silergy SY7636A PMIC.
> > +
> > +       This driver can also be built as a module.  If so, the module
> > +       will be called sy7636a-hwmon.
> > +
> >  config SENSORS_DME1737
> >       tristate "SMSC DME1737, SCH311x and compatibles"
> >       depends on I2C && !PPC
> > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> > index d712c61c1f5e..8b2e09e25b24 100644
> > --- a/drivers/hwmon/Makefile
> > +++ b/drivers/hwmon/Makefile
> > @@ -180,6 +180,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1)    += smsc47m1.o
> >  obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
> >  obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o
> >  obj-$(CONFIG_SENSORS_STTS751)        += stts751.o
> > +obj-$(CONFIG_SENSORS_SY7636A)        += sy7636a-hwmon.o
> >  obj-$(CONFIG_SENSORS_AMC6821)        += amc6821.o
> >  obj-$(CONFIG_SENSORS_TC74)   += tc74.o
> >  obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
> > diff --git a/drivers/hwmon/sy7636a-hwmon.c b/drivers/hwmon/sy7636a-hwmon.c
> > new file mode 100644
> > index 000000000000..4edbee99b693
> > --- /dev/null
> > +++ b/drivers/hwmon/sy7636a-hwmon.c
> > @@ -0,0 +1,106 @@
> > +/*
> > + * Functions to access SY3686A power management chip temperature
> > + *
> > + * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
> > + *
> > + * Author: Lars Ivar Miljeteig <lars.ivar.miljeteig@xxxxxxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation version 2.
> > + *
> > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> > + * kind, whether express or implied; without even the implied warranty
> > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
>
> The long form isn't usually accepted anymore.
>
> Please replace with SPDX.
>
> > + */
> > +
> > +
> > +#include <linux/module.h>
> > +#include <linux/init.h>
> > +#include <linux/slab.h>
> > +#include <linux/jiffies.h>
> > +#include <linux/hwmon.h>
> > +#include <linux/hwmon-sysfs.h>
> > +#include <linux/err.h>
> > +#include <linux/sysfs.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include <linux/mfd/sy7636a.h>
> > +
> > +struct sy7636a_data {
> > +     struct sy7636a *sy7636a;
> > +     struct device *hwmon_dev;
> > +};
> > +
> > +static ssize_t show_temp(struct device *dev,
> > +     struct device_attribute *attr, char *buf)
> > +{
> > +     unsigned int reg_val;
> > +     signed char temp;
> > +     int ret;
> > +     struct sy7636a_data *data = dev_get_drvdata(dev);
> > +
> > +     ret = regmap_read(data->sy7636a->regmap,
> > +                     SY7636A_REG_TERMISTOR_READOUT, &reg_val);
> > +     if (ret)
> > +             return ret;
> > +
> > +     temp = *((signed char*)&reg_val);
>
> Whoa!  What's going on here?
>
> You also need to run checkpatch.pl.
>
> > +     return snprintf(buf, PAGE_SIZE, "%d\n", temp);
> > +}
> > +
> > +static SENSOR_DEVICE_ATTR(temp0, S_IRUGO, show_temp, NULL, 0);
> > +
> > +static struct attribute *sy7636a_attrs[] = {
> > +     &sensor_dev_attr_temp0.dev_attr.attr,
> > +     NULL
> > +};
> > +
> > +ATTRIBUTE_GROUPS(sy7636a);
> > +
> > +static int sy7636a_sensor_probe(struct platform_device *pdev)
> > +{
> > +     struct sy7636a *sy7636a = dev_get_drvdata(pdev->dev.parent);
> > +     struct sy7636a_data *data;
> > +     int err;
> > +
> > +     if (!sy7636a)
> > +             return -EPROBE_DEFER;
> > +
> > +     data = devm_kzalloc(&pdev->dev, sizeof(struct sy7636a_data), GFP_KERNEL);
>
> Where is this used, outside of this function?

Removed.

>
> Not sure I see a good reason for having it around?
>
> > +     if (!data) {
> > +             return -ENOMEM;
> > +     }
> > +
> > +     data->sy7636a = sy7636a;
> > +     data->hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
>
> Why is this being stored into a struct?

Good point, removed.

>
> > +                     "sy7636a_temperature", data, sy7636a_groups);
> > +     if (IS_ERR(data->hwmon_dev)) {
> > +             err = PTR_ERR(data->hwmon_dev);
> > +             dev_err(&pdev->dev, "Unable to register hwmon device, returned %d", err);
> > +             return err;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct platform_device_id sy7636a_sensor_id[] = {
> > +     { "sy7636a-temperature", 0},
> > +     { },
> > +};
> > +MODULE_DEVICE_TABLE(platform, sy7636a_sensor_id);
> > +
> > +static struct platform_driver sy7636a_sensor_driver = {
> > +     .probe = sy7636a_sensor_probe,
> > +     .id_table = sy7636a_sensor_id,
>
> What does this do?

Removed

Alistair

>
> Where is the 'device' being registered?
>
> > +     .driver = {
> > +             .name = "sy7636a-temperature",
> > +     },
> > +};
> > +module_platform_driver(sy7636a_sensor_driver);
> > +
> > +MODULE_DESCRIPTION("SY7636A sensor driver");
> > +MODULE_LICENSE("GPL");
> > +
>
> --
> Lee Jones [李琼斯]
> Senior Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux