This is wrong, but needed in order to avoid overlapping ranges with the OTP area added in the next commit. A refactor of this part of the device tree is needed: according to Wiibrew[1], this area starts at 0x0d800000 and spans 0x400 bytes (that is, 0x100 32-bit registers), encompassing PIC and GPIO registers, amongst the ones already exposed in this device tree, which should become children of the control@d800000 node. [1] https://wiibrew.org/wiki/Hardware/Hollywood_Registers Signed-off-by: Emmanuel Gil Peyrot <linkmauve@xxxxxxxxxxxx> --- arch/powerpc/boot/dts/wii.dts | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts index aaa381da1906..c5fb54f8cc02 100644 --- a/arch/powerpc/boot/dts/wii.dts +++ b/arch/powerpc/boot/dts/wii.dts @@ -216,7 +216,13 @@ AVE: audio-video-encoder@70 { control@d800100 { compatible = "nintendo,hollywood-control"; - reg = <0x0d800100 0x300>; + /* + * Both the address and length are wrong, according to + * Wiibrew this should be <0x0d800000 0x400>, but it + * requires refactoring the PIC1 and GPIO nodes before + * changing that. + */ + reg = <0x0d800100 0xa0>; }; disk@d806000 { -- 2.32.0
