On Fri, 30 Jul 2021 19:16:46 +0200, Dario Binacchi wrote: > Convert the Bosch C_CAN/D_CAN controller device tree binding > documentation to json-schema. > > Document missing properties. > Remove "ti,hwmods" as it is no longer used in TI dts. > Make "clocks" required as it is used in all dts. > Correct nodename in the example. > > Signed-off-by: Dario Binacchi <dariobin@xxxxxxxxx> > > --- > > Changes in v3: > - Add type (phandle-array) and size (maxItems: 2) to syscon-raminit > property. > > Changes in v2: > - Drop Documentation references. > > .../bindings/net/can/bosch,c_can.yaml | 85 +++++++++++++++++++ > .../devicetree/bindings/net/can/c_can.txt | 65 -------------- > 2 files changed, 85 insertions(+), 65 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/can/bosch,c_can.yaml > delete mode 100644 Documentation/devicetree/bindings/net/can/c_can.txt > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/can/bosch,c_can.example.dt.yaml: can@0: syscon-raminit: [[4294967295, 1604, 1]] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml \ndoc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1511753 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.