[PATCH 34/39] arm64: dts: qcom: sdm630-nile: Add Synaptics touchscreen.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Delete the node on Ganges devices, as they use a different one.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 .../qcom/sdm630-sony-xperia-ganges-kirin.dts  |  2 ++
 .../dts/qcom/sdm630-sony-xperia-nile.dtsi     | 36 ++++++++++++++++++-
 2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
index aea949265a2d..a4e1fb8ca52d 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
@@ -20,4 +20,6 @@ framebuffer@9d400000 {
 	};
 };
 
+/* Ganges devices feature a Novatek touchscreen instead. */
+/delete-node/ &touchscreen;
 /delete-node/ &vreg_l18a_1v8;
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 39636690aa34..e589b6c0b78e 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -161,7 +161,29 @@ extcon_usb: extcon-usb {
 &blsp_i2c1 {
 	status = "okay";
 
-	/* Synaptics touchscreen */
+	touchscreen: synaptics-rmi4-i2c@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 45 0x2008>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_lcd_id_active>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <220>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
 };
 
 &blsp_i2c2 {
@@ -541,6 +563,18 @@ &sdhc_1 {
 &tlmm {
 	gpio-reserved-ranges = <8 4>;
 
+	ts_int_active: ts-int-active {
+		pins = "gpio45";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_lcd_id_active: ts-lcd-id-active {
+		pins = "gpio56";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
 	imx300_vana_default: imx300-vana-default {
 		pins = "gpio50";
 		function = "gpio";
-- 
2.32.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux