[PATCH 05/39] arm64: dts: qcom: sdm630: Add MDSS nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add MDSS node along with its children to enable display
functionality.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 198 ++++++++++++++++++++++++++-
 1 file changed, 196 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index c46b7327afbe..e0c6099d0810 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -941,14 +941,208 @@ mmcc: clock-controller@c8c0000 {
 					<&sleep_clk>,
 					<&gcc GCC_MMSS_GPLL0_CLK>,
 					<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
-					<0>,
-					<0>,
+					<&dsi0_phy 1>,
+					<&dsi0_phy 0>,
 					<0>,
 					<0>,
 					<0>,
 					<0>;
 		};
 
+		dsi_opp_table: dsi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-131250000 {
+				opp-hz = /bits/ 64 <131250000>;
+				required-opps = <&rpmpd_opp_svs>;
+			};
+
+			opp-210000000 {
+				opp-hz = /bits/ 64 <210000000>;
+				required-opps = <&rpmpd_opp_svs_plus>;
+			};
+
+			opp-262500000 {
+				opp-hz = /bits/ 64 <262500000>;
+				required-opps = <&rpmpd_opp_nom>;
+			};
+		};
+
+		mdss: mdss@c900000 {
+			compatible = "qcom,mdss";
+			reg = <0x0c900000 0x1000>,
+			      <0x0c9b0000 0x1040>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>,
+				 <&mmcc MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			mdp: mdp@c901000 {
+				compatible = "qcom,mdp5";
+				reg = <0x0c901000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+				assigned-clocks = <&mmcc MDSS_MDP_CLK>,
+						  <&mmcc MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <300000000>,
+						       <19200000>;
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				interconnects = <&mnoc 2 &bimc 5>,
+						<&mnoc 3 &bimc 5>,
+						<&gnoc 0 &mnoc 17>;
+				interconnect-names = "mdp0-mem",
+						     "mdp1-mem",
+						     "rotator-mem";
+				iommus = <&mmss_smmu 0>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SDM660_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: mdp-opp {
+					compatible = "operating-points-v2";
+
+					opp-150000000 {
+						opp-hz = /bits/ 64 <150000000>;
+						opp-peak-kBps = <320000 320000 76800>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+					opp-275000000 {
+						opp-hz = /bits/ 64 <275000000>;
+						opp-peak-kBps = <6400000 6400000 160000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						opp-peak-kBps = <6400000 6400000 190000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+					opp-330000000 {
+						opp-hz = /bits/ 64 <330000000>;
+						opp-peak-kBps = <6400000 6400000 240000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+					opp-412500000 {
+						opp-hz = /bits/ 64 <412500000>;
+						opp-peak-kBps = <6400000 6400000 320000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+			};
+
+			dsi0: dsi@c994000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x0c994000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SDM660_VDDCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>,
+							 <&dsi0_phy 1>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_BYTE0_INTF_CLK>,
+					 <&mmcc MNOC_AHB_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MISC_AHB_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "byte",
+					      "byte_intf",
+					      "mnoc",
+					      "iface",
+					      "bus",
+					      "core_mmss",
+					      "pixel",
+					      "core";
+
+				phys = <&dsi0_phy>;
+				phy-names = "dsi";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi0_phy: dsi-phy@c994400 {
+				compatible = "qcom,dsi-phy-14nm-660";
+				reg = <0x0c994400 0x100>,
+				      <0x0c994500 0x300>,
+				      <0x0c994800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+			};
+		};
+
 		blsp1_dma: dma-controller@c144000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0c144000 0x1f000>;
-- 
2.32.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux