On Sat Jul 17, 2021 at 1:34 PM EDT, Jonathan Cameron wrote:
> On Tue, 13 Jul 2021 00:34:24 -0400
> Liam Beguin <liambeguin@xxxxxxxxx> wrote:
>
> > From: Liam Beguin <lvb@xxxxxxxxxx>
> >
> > Add support for selecting a custom reference voltage from the
> > devicetree. If an external source is used, a vref regulator should be
> > defined in the devicetree.
> >
> > Signed-off-by: Liam Beguin <lvb@xxxxxxxxxx>
>
> Hi Liam,
>
> A few minor things inline.
>
> Jonathan
>
> > ---
> > drivers/iio/adc/ad7949.c | 133 +++++++++++++++++++++++++++++++++------
> > 1 file changed, 115 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c
> > index 65f78751225b..8b78da7ead36 100644
> > --- a/drivers/iio/adc/ad7949.c
> > +++ b/drivers/iio/adc/ad7949.c
> > @@ -36,7 +36,11 @@
> >
> > /* REF: reference/buffer selection */
> > #define AD7949_CFG_BIT_REF GENMASK(5, 3)
> > -#define AD7949_CFG_VAL_REF_EXT_BUF 7
> > +#define AD7949_CFG_VAL_REF_EXT_TEMP_BUF 3
> > +#define AD7949_CFG_VAL_REF_EXT_TEMP 2
> > +#define AD7949_CFG_VAL_REF_INT_4096 1
> > +#define AD7949_CFG_VAL_REF_INT_2500 0
> > +#define AD7949_CFG_VAL_REF_EXTERNAL BIT(1)
> >
> > /* SEQ: channel sequencer. Allows for scanning channels */
> > #define AD7949_CFG_BIT_SEQ GENMASK(2, 1)
> > @@ -61,6 +65,14 @@ static const struct ad7949_adc_spec ad7949_adc_spec[] = {
> > [ID_AD7689] = { .num_channels = 8, .resolution = 16 },
> > };
> >
> > +/**
> > + * struct ad7949_channel - ADC Channel parameters
> > + * @refsel: reference selection
> > + */
> > +struct ad7949_channel {
> > + u32 refsel;
> > +};
> > +
> > /**
> > * struct ad7949_adc_chip - AD ADC chip
> > * @lock: protects write sequences
> > @@ -78,6 +90,7 @@ struct ad7949_adc_chip {
> > struct regulator *vref;
> > struct iio_dev *indio_dev;
> > struct spi_device *spi;
> > + struct ad7949_channel *channels;
> > u8 resolution;
> > u8 bits_per_word;
> > u16 cfg;
> > @@ -138,6 +151,7 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
> > int i;
> > u8 buf8[2];
> > struct spi_message msg;
> > + struct ad7949_channel ad7949_chan = ad7949_adc->channels[channel];
>
> Better to use a pointer rather than copying the data.
>
> > struct spi_transfer tx[] = {
> > {
> > .rx_buf = &ad7949_adc->buffer,
> > @@ -154,8 +168,9 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
> > */
> > for (i = 0; i < 2; i++) {
> > ret = ad7949_spi_write_cfg(ad7949_adc,
> > - FIELD_PREP(AD7949_CFG_BIT_INX, channel),
> > - AD7949_CFG_BIT_INX);
> > + FIELD_PREP(AD7949_CFG_BIT_INX, channel) |
> > + FIELD_PREP(AD7949_CFG_BIT_REF, ad7949_chan.refsel),
> > + AD7949_CFG_BIT_INX | AD7949_CFG_BIT_REF);
> > if (ret)
> > return ret;
> > if (channel == ad7949_adc->current_channel)
> > @@ -225,6 +240,7 @@ static int ad7949_spi_read_raw(struct iio_dev *indio_dev,
> > int *val, int *val2, long mask)
> > {
> > struct ad7949_adc_chip *ad7949_adc = iio_priv(indio_dev);
> > + struct ad7949_channel ad7949_chan = ad7949_adc->channels[chan->channel];
> > int ret;
> >
> > if (!val)
> > @@ -242,12 +258,26 @@ static int ad7949_spi_read_raw(struct iio_dev *indio_dev,
> > return IIO_VAL_INT;
> >
> > case IIO_CHAN_INFO_SCALE:
> > - ret = regulator_get_voltage(ad7949_adc->vref);
> > - if (ret < 0)
> > - return ret;
> > + switch (ad7949_chan.refsel) {
> > + case AD7949_CFG_VAL_REF_INT_2500:
> > + *val = 2500;
> > + break;
> > + case AD7949_CFG_VAL_REF_INT_4096:
> > + *val = 4096;
> > + break;
> > + case AD7949_CFG_VAL_REF_EXT_TEMP:
> > + case AD7949_CFG_VAL_REF_EXT_TEMP_BUF:
> > + ret = regulator_get_voltage(ad7949_adc->vref);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* convert value back to mV */
> > + *val = ret / 1000;
> > + break;
> > + }
> >
> > - *val = ret / 5000;
> > - return IIO_VAL_INT;
> > + *val2 = (1 << ad7949_adc->resolution) - 1;
> > + return IIO_VAL_FRACTIONAL;
> > }
> >
> > return -EINVAL;
> > @@ -286,7 +316,7 @@ static int ad7949_spi_init(struct ad7949_adc_chip *ad7949_adc)
> > FIELD_PREP(AD7949_CFG_BIT_INCC, AD7949_CFG_VAL_INCC_UNIPOLAR_GND) |
> > FIELD_PREP(AD7949_CFG_BIT_INX, ad7949_adc->current_channel) |
> > FIELD_PREP(AD7949_CFG_BIT_BW_FULL, 1) |
> > - FIELD_PREP(AD7949_CFG_BIT_REF, AD7949_CFG_VAL_REF_EXT_BUF) |
> > + FIELD_PREP(AD7949_CFG_BIT_REF, ad7949_adc->channels[0].refsel) |
> > FIELD_PREP(AD7949_CFG_BIT_SEQ, 0x0) |
> > FIELD_PREP(AD7949_CFG_BIT_RBN, 1);
> >
> > @@ -302,14 +332,24 @@ static int ad7949_spi_init(struct ad7949_adc_chip *ad7949_adc)
> > return ret;
> > }
> >
> > +static void ad7949_disable_reg(void *reg)
> > +{
> > + regulator_disable(reg);
> > +}
> > +
> > static int ad7949_spi_probe(struct spi_device *spi)
> > {
> > u32 spi_ctrl_mask = spi->controller->bits_per_word_mask;
> > struct device *dev = &spi->dev;
> > const struct ad7949_adc_spec *spec;
> > struct ad7949_adc_chip *ad7949_adc;
> > + struct ad7949_channel *ad7949_chan;
> > + struct device_node *child;
> > struct iio_dev *indio_dev;
> > + int mode;
> > + u32 tmp;
> > int ret;
> > + int i;
> >
> > indio_dev = devm_iio_device_alloc(dev, sizeof(*ad7949_adc));
> > if (!indio_dev) {
> > @@ -343,16 +383,75 @@ static int ad7949_spi_probe(struct spi_device *spi)
> > return -EINVAL;
> > }
> >
> > - ad7949_adc->vref = devm_regulator_get(dev, "vref");
> > + /* Setup external voltage ref, buffered? */
> > + ad7949_adc->vref = devm_regulator_get(dev, "vrefin");
> > if (IS_ERR(ad7949_adc->vref)) {
> > - dev_err(dev, "fail to request regulator\n");
> > - return PTR_ERR(ad7949_adc->vref);
> > + /* unbuffered? */
> > + ad7949_adc->vref = devm_regulator_get(dev, "vref");
> > + if (IS_ERR(ad7949_adc->vref)) {
> > + /* Internal then */
> > + mode = AD7949_CFG_VAL_REF_INT_4096;
> > + }
> > + mode = AD7949_CFG_VAL_REF_EXT_TEMP;
> > }
> > + mode = AD7949_CFG_VAL_REF_EXT_TEMP_BUF;
> >
> > - ret = regulator_enable(ad7949_adc->vref);
> > - if (ret < 0) {
> > - dev_err(dev, "fail to enable regulator\n");
> > - return ret;
> > + if (mode > AD7949_CFG_VAL_REF_INT_4096) {
>
> Range checks on enum values are always rather messy. So
> better to explicitly match the cases that matter.
>
Understood, I'll use AD7949_CFG_VAL_REF_EXTERNAL instead.
> > + ret = regulator_enable(ad7949_adc->vref);
> > + if (ret < 0) {
> > + dev_err(dev, "fail to enable regulator\n");
> > + return ret;
> > + }
> > +
> > + ret = devm_add_action_or_reset(dev, ad7949_disable_reg,
> > + ad7949_adc->vref);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + ad7949_adc->channels = devm_kcalloc(dev, spec->num_channels,
> > + sizeof(*ad7949_adc->channels),
> > + GFP_KERNEL);
> > + if (!ad7949_adc->channels) {
> > + dev_err(dev, "unable to allocate ADC channels\n");
> > + return -ENOMEM;
> > + }
> > +
> > + /* Initialize all channel structures */
> > + for (i = 0; i < spec->num_channels; i++) {
> > + ad7949_adc->channels[i].refsel = mode;
>
> Kernel style is no brackets when only one item in a block.
>
> > + }
> > +
> > + /* Read channel specific information form the devicetree */
> > + for_each_child_of_node(dev->of_node, child) {
> > + ret = of_property_read_u32(child, "reg", &i);
> > + if (ret) {
> > + dev_err(dev, "missing reg property in child: %s\n",
> > + child->full_name);
> > + of_node_put(child);
> > + return ret;
> > + }
> > +
> > + ad7949_chan = &ad7949_adc->channels[i];
> > +
> > + ret = of_property_read_u32(child, "adi,internal-ref-mv", &tmp);
>
> Preference for generic device firmware properties not of_* specific
> ones.
>
> I think there is nothing stopping this driver being probed from ACPI via
> PRP0001
> before this change. Note you'll also need fwnode_for_each_child_node()
> above.
>
will do.
> > + if (ret < 0 && ret != -EINVAL) {
> > + of_node_put(child);
> > + return ret;
> > + }
> > +
> > + switch (tmp) {
> > + case 2500:
> > + ad7949_chan->refsel = AD7949_CFG_VAL_REF_INT_2500;
> > + break;
> > + case 4096:
> > + ad7949_chan->refsel = AD7949_CFG_VAL_REF_INT_4096;
> > + break;
> > + default:
> > + dev_err(dev, "unsupported internal voltage reference\n");
> > + of_node_put(child);
> > + return -EINVAL;
> > + }
> > }
> >
> > mutex_init(&ad7949_adc->lock);
> > @@ -373,7 +472,6 @@ static int ad7949_spi_probe(struct spi_device *spi)
> >
> > err:
> > mutex_destroy(&ad7949_adc->lock);
> > - regulator_disable(ad7949_adc->vref);
> >
> > return ret;
> > }
> > @@ -385,7 +483,6 @@ static int ad7949_spi_remove(struct spi_device *spi)
> >
> > iio_device_unregister(indio_dev);
> > mutex_destroy(&ad7949_adc->lock);
> > - regulator_disable(ad7949_adc->vref);
>
> Given mutex_destroy is mostly pointless (and definitely is here) that
> leaves us with just iio_device_register(). Hence if you could do
> a follow up patch finishing conversion of this to entirely devm managed
> that would be a nice addition to this series (or separate patch is fine
> as well).
>
Sure, I'll add that cleanup in the next revision.
Thanks,
Liam
> >
> > return 0;
> > }
