Quoting Chun-Jie Chen (2021-07-26 03:57:04) > In fact, the en_mask is a combination of divider enable mask > and pll enable bit(bit0). > Before this patch, we enabled both divider mask and bit0 in prepare(), > but only cleared the bit0 in unprepare(). > In the future, we hope en_mask will only be used as divider enable mask. > The enable register(CON0) will be set in 2 steps: > first is divider mask, and then bit0 during prepare(), and vice versa. > But considering backward compatibility, at this stage we allow en_mask > to be a combination or a pure divider enable mask. > And then we will make en_mask a pure divider enable mask in another > following patch series. > > Reviewed-by: Ikjoon Jang <ikjn@xxxxxxxxxxxx> > Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx> > Signed-off-by: Chun-Jie Chen <chun-jie.chen@xxxxxxxxxxxx> > --- Applied to clk-next
