an almost blind conversion from readl_relaxed to our newly introduced intc_readl(). While at that, also remove some hardcoded register addresses. Signed-off-by: Felipe Balbi <balbi@xxxxxx> --- arch/arm/mach-omap2/irq.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 8905ebb..88bba9e 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -41,11 +41,13 @@ #define INTC_MIR_CLEAR0 0x0088 #define INTC_MIR_SET0 0x008c #define INTC_PENDING_IRQ0 0x0098 +#define INTC_PENDING_IRQ1 0x00b8 +#define INTC_PENDING_IRQ2 0x00d8 +#define INTC_PENDING_IRQ3 0x00f8 #define INTC_ILR0 0x0100 #define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) #define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) -#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */ #define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */ #define INTCPS_NR_ILR_REGS 128 #define INTCPS_NR_MIR_REGS 3 @@ -192,26 +194,26 @@ static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs int handled_irq = 0; do { - irqnr = readl_relaxed(base_addr + 0x98); + irqnr = intc_readl(INTC_PENDING_IRQ0); if (irqnr) goto out; - irqnr = readl_relaxed(base_addr + 0xb8); + irqnr = intc_readl(INTC_PENDING_IRQ1); if (irqnr) goto out; - irqnr = readl_relaxed(base_addr + 0xd8); + irqnr = intc_readl(INTC_PENDING_IRQ2); #if IS_ENABLED(CONFIG_SOC_TI81XX) || IS_ENABLED(CONFIG_SOC_AM33XX) if (irqnr) goto out; - irqnr = readl_relaxed(base_addr + 0xf8); + irqnr = intc_readl(INTC_PENDING_IRQ3); #endif out: if (!irqnr) break; - irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET); + irqnr = intc_readl(INTC_SIR); irqnr &= ACTIVEIRQ_MASK; if (irqnr) { -- 2.0.1.563.g66f467c -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html