Re: [PATCH 2/2] ARM: dts: at91: add conflict note for d3

[Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>]

On 27/07/2021 at 09:40, Claudiu Beznea wrote:
> Pin feeding d3 led may be in conflict with EBI CS0, USART2 CTS.
> Add a note for this.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Queued for 5.15 in at91-dt.

Regards,
  Nicolas

> ---
>   arch/arm/boot/dts/at91-sama5d3_xplained.dts | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> index cc55d1684322..d72c042f2850 100644
> --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> @@ -399,7 +399,7 @@ d2 {
>   		};
>   
>   		d3 {
> -			label = "d3";
> +			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
>   			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
>   		};
>   	};


--
Nicolas Ferre