Re: [PATCH v2 3/3] drm/panel-simple: add Gopher 2b LCD panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Sam! Thanks for commentaries, I've sent v3.

On 25/07/2021 23.23, Sam Ravnborg wrote:
On Sat, Jul 24, 2021 at 01:33:58PM +0300, Artjom Vejsel wrote:
The Gopher 2b LCD panel is used in Gopher 2b handhelds.
It's simple panel with NewVision NV3047 driver, but SPI lines are not connected.
It has no specific name, since it's unique to that handhelds.
lot name at AliExpress: 4.3 inch 40PIN TFT LCD Screen COG NV3047 Drive IC 480(RGB)*272 No Touch 24Bit RGB Interface

Signed-off-by: Artjom Vejsel <akawolf0@xxxxxxxxx>
---
  drivers/gpu/drm/panel/panel-simple.c | 43 ++++++++++++++++++++++++++++
  1 file changed, 43 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 9b286bd4444f..9676e25accb3 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -4306,6 +4306,46 @@ static const struct panel_desc yes_optoelectronics_ytc700tlag_05_201c = {
  	.connector_type = DRM_MODE_CONNECTOR_LVDS,
  };
+static const struct drm_display_mode qishenglong_gopher2b_lcd_panel_modes[] = {
+	{ /* 60 Hz */
+		.clock = 10800,
+		.hdisplay = 480,
+		.hsync_start = 480 + 77,
+		.hsync_end = 480 + 77 + 41,
+		.htotal = 480 + 77 + 41 + 2,
+		.vdisplay = 272,
+		.vsync_start = 272 + 16,
+		.vsync_end = 272 + 16 + 10,
+		.vtotal = 272 + 16 + 10 + 2,
+		.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+	},
+	{ /* 50 Hz */
+		.clock = 10800,
+		.hdisplay = 480,
+		.hsync_start = 480 + 17,
+		.hsync_end = 480 + 17 + 41,
+		.htotal = 480 + 17 + 41 + 2,
+		.vdisplay = 272,
+		.vsync_start = 272 + 116,
+		.vsync_end = 272 + 116 + 10,
+		.vtotal = 272 + 116 + 10 + 2,
+		.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+	},
+};
+
+static const struct panel_desc qishenglong_gopher2b_lcd_panel = {
+	.modes = qishenglong_gopher2b_lcd_panel_modes,
+	.num_modes = ARRAY_SIZE(qishenglong_gopher2b_lcd_panel_modes),
+	.bpc = 8,
+	.size = {
+		.width = 95,
+		.height = 54,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
  static const struct drm_display_mode arm_rtsm_mode[] = {
  	{
  		.clock = 65000,
@@ -4753,6 +4793,9 @@ static const struct of_device_id platform_of_match[] = {
  	}, {
  		.compatible = "yes-optoelectronics,ytc700tlag-05-201c",
  		.data = &yes_optoelectronics_ytc700tlag_05_201c,
+	}, {
+		.compatible = "qishenglong,gopher2b-lcd-panel",
+		.data = &qishenglong_gopher2b_lcd_panel,
  	}, {
This list shall also be sorted alphabetically, after the compatible.
Same goes for the definition of the variable &qishenglong_gopher2b_lcd_panel
that shall be listed in the same order as here.

Sorry for the nit-picking - but if we do not ask to have it fixed then
we quickly have a mess.

	Sam



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux