From: Dillon Min <dillon.minfei@xxxxxxxxx>
This driver combines tiny/ili9341.c mipi_dbi_interface driver
with mipi_dpi_interface driver, can support ili9341 with serial
mode and parallel rgb interface mode by different dts bindings.
Signed-off-by: Dillon Min <dillon.minfei@xxxxxxxxx>
Reported-by: kernel test robot <lkp@xxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Reviewed-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
v4:
- fix m68k-allmodconfig build error which reported by lkp, thanks.
- add Copyright 2018 David Lechner <david@xxxxxxxxxxxxxx>.
drivers/gpu/drm/panel/Kconfig | 12 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 792 +++++++++++++++++++++++++++
3 files changed, 805 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index ef87d92cdf49..eb34b8d1b19a 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -124,6 +124,18 @@ config DRM_PANEL_ILITEK_IL9322
Say Y here if you want to enable support for Ilitek IL9322
QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
+config DRM_PANEL_ILITEK_ILI9341
+ tristate "Ilitek ILI9341 240x320 QVGA panels"
+ depends on OF && SPI
+ depends on DRM_KMS_HELPER
+ depends on DRM_KMS_CMA_HELPER
+ depends on BACKLIGHT_CLASS_DEVICE
+ select DRM_MIPI_DBI
+ help
+ Say Y here if you want to enable support for Ilitek IL9341
+ QVGA (240x320) RGB panels. support serial & parallel rgb
+ interface.
+
config DRM_PANEL_ILITEK_ILI9881C
tristate "Ilitek ILI9881C-based panels"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index cae4d976c069..0ecde184665d 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o
obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
+obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
new file mode 100644
index 000000000000..2c3378a259b1
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
@@ -0,0 +1,792 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Ilitek ILI9341 TFT LCD drm_panel driver.
+ *
+ * This panel can be configured to support:
+ * - 16-bit parallel RGB interface
+ * - 18-bit parallel RGB interface
+ * - 4-line serial spi interface
+ *
+ * Copyright (C) 2021 Dillon Min <dillon.minfei@xxxxxxxxx>
+ *
+ * For dbi+dpi part:
+ * Derived from drivers/drm/gpu/panel/panel-ilitek-ili9322.c
+ * the reuse of DBI abstraction part referred from Linus's patch
+ * "drm/panel: s6e63m0: Switch to DBI abstraction for SPI"
+ *
+ * For only-dbi part, copy from David's code (drm/tiny/ili9341.c)
+ * Copyright 2018 David Lechner <david@xxxxxxxxxxxxxx>
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_mipi_dbi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+#define ILI9341_RGB_INTERFACE 0xb0 /* RGB Interface Signal Control */
+#define ILI9341_FRC 0xb1 /* Frame Rate Control register */
+#define ILI9341_DFC 0xb6 /* Display Function Control register */
+#define ILI9341_POWER1 0xc0 /* Power Control 1 register */
+#define ILI9341_POWER2 0xc1 /* Power Control 2 register */
+#define ILI9341_VCOM1 0xc5 /* VCOM Control 1 register */
+#define ILI9341_VCOM2 0xc7 /* VCOM Control 2 register */
+#define ILI9341_POWERA 0xcb /* Power control A register */
+#define ILI9341_POWERB 0xcf /* Power control B register */
+#define ILI9341_PGAMMA 0xe0 /* Positive Gamma Correction register */
+#define ILI9341_NGAMMA 0xe1 /* Negative Gamma Correction register */
+#define ILI9341_DTCA 0xe8 /* Driver timing control A */
+#define ILI9341_DTCB 0xea /* Driver timing control B */
+#define ILI9341_POWER_SEQ 0xed /* Power on sequence register */
+#define ILI9341_3GAMMA_EN 0xf2 /* 3 Gamma enable register */
+#define ILI9341_INTERFACE 0xf6 /* Interface control register */
+#define ILI9341_PRC 0xf7 /* Pump ratio control register */
+#define ILI9341_ETMOD 0xb7 /* Entry mode set */
+
+#define ILI9341_MADCTL_BGR BIT(3)
+#define ILI9341_MADCTL_MV BIT(5)
+#define ILI9341_MADCTL_MX BIT(6)
+#define ILI9341_MADCTL_MY BIT(7)
+
+#define ILI9341_POWER_B_LEN 3
+#define ILI9341_POWER_SEQ_LEN 4
+#define ILI9341_DTCA_LEN 3
+#define ILI9341_DTCB_LEN 2
+#define ILI9341_POWER_A_LEN 5
+#define ILI9341_DFC_1_LEN 2
+#define ILI9341_FRC_LEN 2
+#define ILI9341_VCOM_1_LEN 2
+#define ILI9341_DFC_2_LEN 4
+#define ILI9341_COLUMN_ADDR_LEN 4
+#define ILI9341_PAGE_ADDR_LEN 4
+#define ILI9341_INTERFACE_LEN 3
+#define ILI9341_PGAMMA_LEN 15
+#define ILI9341_NGAMMA_LEN 15
+#define ILI9341_CA_LEN 3
+
+#define ILI9341_PIXEL_DPI_16_BITS (BIT(6) | BIT(4))
+#define ILI9341_PIXEL_DPI_18_BITS (BIT(6) | BIT(5))
+#define ILI9341_GAMMA_CURVE_1 BIT(0)
+#define ILI9341_IF_WE_MODE BIT(0)
+#define ILI9341_IF_BIG_ENDIAN 0x00
+#define ILI9341_IF_DM_RGB BIT(2)
+#define ILI9341_IF_DM_INTERNAL 0x00
+#define ILI9341_IF_DM_VSYNC BIT(3)
+#define ILI9341_IF_RM_RGB BIT(1)
+#define ILI9341_IF_RIM_RGB 0x00
+
+#define ILI9341_COLUMN_ADDR 0x00ef
+#define ILI9341_PAGE_ADDR 0x013f
+
+#define ILI9341_RGB_EPL BIT(0)
+#define ILI9341_RGB_DPL BIT(1)
+#define ILI9341_RGB_HSPL BIT(2)
+#define ILI9341_RGB_VSPL BIT(3)
+#define ILI9341_RGB_DE_MODE BIT(6)
+#define ILI9341_RGB_DISP_PATH_MEM BIT(7)
+
+#define ILI9341_DBI_VCOMH_4P6V 0x23
+#define ILI9341_DBI_PWR_2_DEFAULT 0x10
+#define ILI9341_DBI_PRC_NORMAL 0x20
+#define ILI9341_DBI_VCOM_1_VMH_4P25V 0x3e
+#define ILI9341_DBI_VCOM_1_VML_1P5V 0x28
+#define ILI9341_DBI_VCOM_2_DEC_58 0x86
+#define ILI9341_DBI_FRC_DIVA 0x00
+#define ILI9341_DBI_FRC_RTNA 0x1b
+#define ILI9341_DBI_EMS_GAS BIT(0)
+#define ILI9341_DBI_EMS_DTS BIT(1)
+#define ILI9341_DBI_EMS_GON BIT(2)
+
+/* struct ili9341_config - the system specific ILI9341 configuration */
+struct ili9341_config {
+ u32 max_spi_speed;
+ /* mode: the drm display mode */
+ const struct drm_display_mode mode;
+ /* ca: TODO: need comments for this register */
+ u8 ca[ILI9341_CA_LEN];
+ /* power_b: TODO: need comments for this register */
+ u8 power_b[ILI9341_POWER_B_LEN];
+ /* power_seq: TODO: need comments for this register */
+ u8 power_seq[ILI9341_POWER_SEQ_LEN];
+ /* dtca: TODO: need comments for this register */
+ u8 dtca[ILI9341_DTCA_LEN];
+ /* dtcb: TODO: need comments for this register */
+ u8 dtcb[ILI9341_DTCB_LEN];
+ /* power_a: TODO: need comments for this register */
+ u8 power_a[ILI9341_POWER_A_LEN];
+ /* frc: Frame Rate Control (In Normal Mode/Full Colors) (B1h) */
+ u8 frc[ILI9341_FRC_LEN];
+ /* prc: TODO: need comments for this register */
+ u8 prc;
+ /* dfc_1: B6h DISCTRL (Display Function Control) */
+ u8 dfc_1[ILI9341_DFC_1_LEN];
+ /* power_1: Power Control 1 (C0h) */
+ u8 power_1;
+ /* power_2: Power Control 2 (C1h) */
+ u8 power_2;
+ /* vcom_1: VCOM Control 1(C5h) */
+ u8 vcom_1[ILI9341_VCOM_1_LEN];
+ /* vcom_2: VCOM Control 2(C7h) */
+ u8 vcom_2;
+ /* address_mode: Memory Access Control (36h) */
+ u8 address_mode;
+ /* g3amma_en: TODO: need comments for this register */
+ u8 g3amma_en;
+ /* rgb_interface: RGB Interface Signal Control (B0h) */
+ u8 rgb_interface;
+ /* dfc_2: refer to dfc_1 */
+ u8 dfc_2[ILI9341_DFC_2_LEN];
+ /* column_addr: Column Address Set (2Ah) */
+ u8 column_addr[ILI9341_COLUMN_ADDR_LEN];
+ /* page_addr: Page Address Set (2Bh) */
+ u8 page_addr[ILI9341_PAGE_ADDR_LEN];
+ /* interface: Interface Control (F6h) */
+ u8 interface[ILI9341_INTERFACE_LEN];
+ /*
+ * pixel_format: This command sets the pixel format for the RGB
+ * image data used by
+ */
+ u8 pixel_format;
+ /*
+ * gamma_curve: This command is used to select the desired Gamma
+ * curve for the
+ */
+ u8 gamma_curve;
+ /* pgamma: Positive Gamma Correction (E0h) */
+ u8 pgamma[ILI9341_PGAMMA_LEN];
+ /* ngamma: Negative Gamma Correction (E1h) */
+ u8 ngamma[ILI9341_NGAMMA_LEN];
+};
+
+struct ili9341 {
+ struct device *dev;
+ const struct ili9341_config *conf;
+ struct drm_panel panel;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *dc_gpio;
+ struct mipi_dbi *dbi;
+ u32 max_spi_speed;
+ struct regulator_bulk_data supplies[3];
+};
+
+/*
+ * The Stm32f429-disco board has a panel ili9341 connected to ltdc controller
+ */
+static const struct ili9341_config ili9341_stm32f429_disco_data = {
+ .max_spi_speed = 10000000,
+ .mode = {
+ .clock = 6100,
+ .hdisplay = 240,
+ .hsync_start = 240 + 10,/* hfp 10 */
+ .hsync_end = 240 + 10 + 10,/* hsync 10 */
+ .htotal = 240 + 10 + 10 + 20,/* hbp 20 */
+ .vdisplay = 320,
+ .vsync_start = 320 + 4,/* vfp 4 */
+ .vsync_end = 320 + 4 + 2,/* vsync 2 */
+ .vtotal = 320 + 4 + 2 + 2,/* vbp 2 */
+ .flags = 0,
+ .width_mm = 65,
+ .height_mm = 50,
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+ },
+ .ca = {0xc3, 0x08, 0x50},
+ .power_b = {0x00, 0xc1, 0x30},
+ .power_seq = {0x64, 0x03, 0x12, 0x81},
+ .dtca = {0x85, 0x00, 0x78},
+ .power_a = {0x39, 0x2c, 0x00, 0x34, 0x02},
+ .prc = 0x20,
+ .dtcb = {0x00, 0x00},
+ /* 0x00 fosc, 0x1b 70hz */
+ .frc = {0x00, 0x1b},
+ /*
+ * 0x0a Interval scan, AGND AGND AGND AGND
+ * 0xa2 Normally white, G1 -> G320, S720 -> S1,
+ * Scan Cycle 5 frames,85ms
+ */
+ .dfc_1 = {0x0a, 0xa2},
+ /* 0x10 3.65v */
+ .power_1 = 0x10,
+ /* 0x10 AVDD=vci*2, VGH=vci*7, VGL=-vci*4 */
+ .power_2 = 0x10,
+ /* 0x45 VCOMH 4.425v, 0x15 VCOML -1.975*/
+ .vcom_1 = {0x45, 0x15},
+ /* 0x90 offset voltage, VMH-48, VML-48 */
+ .vcom_2 = 0x90,
+ /*
+ * 0xc8 Row Address Order, Column Address Order
+ * BGR 1
+ */
+ .address_mode = 0xc8,
+ .g3amma_en = 0x00,
+ /*
+ * 0xc2
+ * Display Data Path: Memory
+ * RGB: DE mode
+ * DOTCLK polarity set (data fetched at the falling time)
+ */
+ .rgb_interface = ILI9341_RGB_DISP_PATH_MEM |
+ ILI9341_RGB_DE_MODE |
+ ILI9341_RGB_DPL,
+ /*
+ * 0x0a
+ * Gate outputs in non-display area: Interval scan
+ * Determine source/VCOM output in a non-display area in the partial
+ * display mode: AGND AGND AGND AGND
+ *
+ * 0xa7
+ * Scan Cycle: 15 frames
+ * fFLM = 60Hz: 255ms
+ * Liquid crystal type: Normally white
+ * Gate Output Scan Direction: G1 -> G320
+ * Source Output Scan Direction: S720 -> S1
+ *
+ * 0x27
+ * LCD Driver Line: 320 lines
+ *
+ * 0x04
+ * PCDIV: 4
+ */
+ .dfc_2 = {0x0a, 0xa7, 0x27, 0x04},
+ /* column address: 240 */
+ .column_addr = {0x00, 0x00, (ILI9341_COLUMN_ADDR >> 4) & 0xff,
+ ILI9341_COLUMN_ADDR & 0xff},
+ /* page address: 320 */
+ .page_addr = {0x00, 0x00, (ILI9341_PAGE_ADDR >> 4) & 0xff,
+ ILI9341_PAGE_ADDR & 0xff},
+ /*
+ * Memory write control: When the transfer number of data exceeds
+ * (EC-SC+1)*(EP-SP+1), the column and page number will be
+ * reset, and the exceeding data will be written into the following
+ * column and page.
+ * Display Operation Mode: RGB Interface Mode
+ * Interface for RAM Access: RGB interface
+ * 16- bit RGB interface (1 transfer/pixel)
+ */
+ .interface = {ILI9341_IF_WE_MODE, 0x00,
+ ILI9341_IF_DM_RGB | ILI9341_IF_RM_RGB},
+ /* DPI: 16 bits / pixel */
+ .pixel_format = ILI9341_PIXEL_DPI_16_BITS,
+ /* Curve Selected: Gamma curve 1 (G2.2) */
+ .gamma_curve = ILI9341_GAMMA_CURVE_1,
+ .pgamma = {0x0f, 0x29, 0x24, 0x0c, 0x0e,
+ 0x09, 0x4e, 0x78, 0x3c, 0x09,
+ 0x13, 0x05, 0x17, 0x11, 0x00},
+ .ngamma = {0x00, 0x16, 0x1b, 0x04, 0x11,
+ 0x07, 0x31, 0x33, 0x42, 0x05,
+ 0x0c, 0x0a, 0x28, 0x2f, 0x0f},
+};
+
+static inline struct ili9341 *panel_to_ili9341(struct drm_panel *panel)
+{
+ return container_of(panel, struct ili9341, panel);
+}
+
+static void ili9341_dpi_init(struct ili9341 *ili)
+{
+ struct device *dev = (&ili->panel)->dev;
+ struct mipi_dbi *dbi = ili->dbi;
+ struct ili9341_config *cfg = (struct ili9341_config *)ili->conf;
+
+ /* Power Control */
+ mipi_dbi_command_stackbuf(dbi, 0xca, cfg->ca, ILI9341_CA_LEN);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_POWERB, cfg->power_b,
+ ILI9341_POWER_B_LEN);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_POWER_SEQ, cfg->power_seq,
+ ILI9341_POWER_SEQ_LEN);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_DTCA, cfg->dtca,
+ ILI9341_DTCA_LEN);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_POWERA, cfg->power_a,
+ ILI9341_POWER_A_LEN);
+ mipi_dbi_command(ili->dbi, ILI9341_PRC, cfg->prc);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_DTCB, cfg->dtcb,
+ ILI9341_DTCB_LEN);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_FRC, cfg->frc, ILI9341_FRC_LEN);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_DFC, cfg->dfc_1,
+ ILI9341_DFC_1_LEN);
+ mipi_dbi_command(dbi, ILI9341_POWER1, cfg->power_1);
+ mipi_dbi_command(dbi, ILI9341_POWER2, cfg->power_2);
+
+ /* VCOM */
+ mipi_dbi_command_stackbuf(dbi, ILI9341_VCOM1, cfg->vcom_1,
+ ILI9341_VCOM_1_LEN);
+ mipi_dbi_command(dbi, ILI9341_VCOM2, cfg->vcom_2);
+ mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, cfg->address_mode);
+
+ /* Gamma */
+ mipi_dbi_command(dbi, ILI9341_3GAMMA_EN, cfg->g3amma_en);
+ mipi_dbi_command(dbi, ILI9341_RGB_INTERFACE, cfg->rgb_interface);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_DFC, cfg->dfc_2,
+ ILI9341_DFC_2_LEN);
+
+ /* Colomn address set */
+ mipi_dbi_command_stackbuf(dbi, MIPI_DCS_SET_COLUMN_ADDRESS,
+ cfg->column_addr, ILI9341_COLUMN_ADDR_LEN);
+
+ /* Page address set */
+ mipi_dbi_command_stackbuf(dbi, MIPI_DCS_SET_PAGE_ADDRESS,
+ cfg->page_addr, ILI9341_PAGE_ADDR_LEN);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_INTERFACE, cfg->interface,
+ ILI9341_INTERFACE_LEN);
+
+ /* Format */
+ mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, cfg->pixel_format);
+ mipi_dbi_command(dbi, MIPI_DCS_WRITE_MEMORY_START);
+ msleep(200);
+ mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, cfg->gamma_curve);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_PGAMMA, cfg->pgamma,
+ ILI9341_PGAMMA_LEN);
+ mipi_dbi_command_stackbuf(dbi, ILI9341_NGAMMA, cfg->ngamma,
+ ILI9341_NGAMMA_LEN);
+ mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
+ msleep(200);
+ mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
+ mipi_dbi_command(dbi, MIPI_DCS_WRITE_MEMORY_START);
+
+ dev_info(dev, "Initialized display rgb interface\n");
+}
+
+static int ili9341_dpi_power_on(struct ili9341 *ili)
+{
+ struct device *dev = (&ili->panel)->dev;
+ int ret = 0;
+
+ /* Assert RESET */
+ gpiod_set_value(ili->reset_gpio, 1);
+
+ /* Enable power */
+ ret = regulator_bulk_enable(ARRAY_SIZE(ili->supplies),
+ ili->supplies);
+ if (ret < 0) {
+ dev_err(dev, "unable to enable vcc\n");
+ return ret;
+ }
+ msleep(20);
+
+ /* De-assert RESET */
+ gpiod_set_value(ili->reset_gpio, 0);
+ msleep(20);
+
+ return 0;
+}
+
+static int ili9341_dpi_power_off(struct ili9341 *ili)
+{
+ /* Assert RESET */
+ gpiod_set_value(ili->reset_gpio, 1);
+
+ /* Disable power */
+ return regulator_bulk_disable(ARRAY_SIZE(ili->supplies),
+ ili->supplies);
+}
+
+static int ili9341_dpi_disable(struct drm_panel *panel)
+{
+ struct ili9341 *ili = panel_to_ili9341(panel);
+
+ mipi_dbi_command(ili->dbi, MIPI_DCS_SET_DISPLAY_OFF);
+ return 0;
+}
+
+static int ili9341_dpi_unprepare(struct drm_panel *panel)
+{
+ struct ili9341 *ili = panel_to_ili9341(panel);
+
+ return ili9341_dpi_power_off(ili);
+}
+
+static int ili9341_dpi_prepare(struct drm_panel *panel)
+{
+ struct ili9341 *ili = panel_to_ili9341(panel);
+ int ret;
+
+ ret = ili9341_dpi_power_on(ili);
+ if (ret < 0)
+ return ret;
+
+ ili9341_dpi_init(ili);
+
+ return ret;
+}
+
+static int ili9341_dpi_enable(struct drm_panel *panel)
+{
+ struct ili9341 *ili = panel_to_ili9341(panel);
+
+ mipi_dbi_command(ili->dbi, MIPI_DCS_SET_DISPLAY_ON);
+ return 0;
+}
+
+static int ili9341_dpi_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct ili9341 *ili = panel_to_ili9341(panel);
+ struct drm_device *drm = connector->dev;
+ struct drm_display_mode *mode;
+ struct drm_display_info *info;
+
+ info = &connector->display_info;
+ info->width_mm = ili->conf->mode.width_mm;
+ info->height_mm = ili->conf->mode.height_mm;
+
+ if (ili->conf->rgb_interface & ILI9341_RGB_DPL)
+ info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
+ else
+ info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
+
+ if (ili->conf->rgb_interface & ILI9341_RGB_EPL)
+ info->bus_flags |= DRM_BUS_FLAG_DE_LOW;
+ else
+ info->bus_flags |= DRM_BUS_FLAG_DE_HIGH;
+
+ mode = drm_mode_duplicate(drm, &ili->conf->mode);
+ if (!mode) {
+ drm_err(drm, "bad mode or failed to add mode\n");
+ return -EINVAL;
+ }
+ drm_mode_set_name(mode);
+
+ /* Set up the polarity */
+ if (ili->conf->rgb_interface & ILI9341_RGB_HSPL)
+ mode->flags |= DRM_MODE_FLAG_PHSYNC;
+ else
+ mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (ili->conf->rgb_interface & ILI9341_RGB_VSPL)
+ mode->flags |= DRM_MODE_FLAG_PVSYNC;
+ else
+ mode->flags |= DRM_MODE_FLAG_NVSYNC;
+
+ drm_mode_probed_add(connector, mode);
+
+ return 1; /* Number of modes */
+}
+
+static const struct drm_panel_funcs ili9341_dpi_funcs = {
+ .disable = ili9341_dpi_disable,
+ .unprepare = ili9341_dpi_unprepare,
+ .prepare = ili9341_dpi_prepare,
+ .enable = ili9341_dpi_enable,
+ .get_modes = ili9341_dpi_get_modes,
+};
+
+static void ili9341_dbi_enable(struct drm_simple_display_pipe *pipe,
+ struct drm_crtc_state *crtc_state,
+ struct drm_plane_state *plane_state)
+{
+ struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
+ struct mipi_dbi *dbi = &dbidev->dbi;
+ u8 addr_mode;
+ int ret, idx;
+
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
+
+ ret = mipi_dbi_poweron_conditional_reset(dbidev);
+ if (ret < 0)
+ goto out_exit;
+ if (ret == 1)
+ goto out_enable;
+
+ mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF);
+
+ mipi_dbi_command(dbi, ILI9341_POWERB, 0x00, 0xc1, 0x30);
+ mipi_dbi_command(dbi, ILI9341_POWER_SEQ, 0x64, 0x03, 0x12, 0x81);
+ mipi_dbi_command(dbi, ILI9341_DTCA, 0x85, 0x00, 0x78);
+ mipi_dbi_command(dbi, ILI9341_POWERA, 0x39, 0x2c, 0x00, 0x34, 0x02);
+ mipi_dbi_command(dbi, ILI9341_PRC, ILI9341_DBI_PRC_NORMAL);
+ mipi_dbi_command(dbi, ILI9341_DTCB, 0x00, 0x00);
+
+ /* Power Control */
+ mipi_dbi_command(dbi, ILI9341_POWER1, ILI9341_DBI_VCOMH_4P6V);
+ mipi_dbi_command(dbi, ILI9341_POWER2, ILI9341_DBI_PWR_2_DEFAULT);
+ /* VCOM */
+ mipi_dbi_command(dbi, ILI9341_VCOM1, ILI9341_DBI_VCOM_1_VMH_4P25V,
+ ILI9341_DBI_VCOM_1_VML_1P5V);
+ mipi_dbi_command(dbi, ILI9341_VCOM2, ILI9341_DBI_VCOM_2_DEC_58);
+
+ /* Memory Access Control */
+ mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT,
+ MIPI_DCS_PIXEL_FMT_16BIT);
+
+ /* Frame Rate */
+ mipi_dbi_command(dbi, ILI9341_FRC, ILI9341_DBI_FRC_DIVA & 0x03,
+ ILI9341_DBI_FRC_RTNA & 0x1f);
+
+ /* Gamma */
+ mipi_dbi_command(dbi, ILI9341_3GAMMA_EN, 0x00);
+ mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, ILI9341_GAMMA_CURVE_1);
+ mipi_dbi_command(dbi, ILI9341_PGAMMA,
+ 0x0f, 0x31, 0x2b, 0x0c, 0x0e, 0x08, 0x4e, 0xf1,
+ 0x37, 0x07, 0x10, 0x03, 0x0e, 0x09, 0x00);
+ mipi_dbi_command(dbi, ILI9341_NGAMMA,
+ 0x00, 0x0e, 0x14, 0x03, 0x11, 0x07, 0x31, 0xc1,
+ 0x48, 0x08, 0x0f, 0x0c, 0x31, 0x36, 0x0f);
+
+ /* DDRAM */
+ mipi_dbi_command(dbi, ILI9341_ETMOD, ILI9341_DBI_EMS_GAS |
+ ILI9341_DBI_EMS_DTS |
+ ILI9341_DBI_EMS_GON);
+
+ /* Display */
+ mipi_dbi_command(dbi, ILI9341_DFC, 0x08, 0x82, 0x27, 0x00);
+ mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
+ msleep(100);
+
+ mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
+ msleep(100);
+
+out_enable:
+ switch (dbidev->rotation) {
+ default:
+ addr_mode = ILI9341_MADCTL_MX;
+ break;
+ case 90:
+ addr_mode = ILI9341_MADCTL_MV;
+ break;
+ case 180:
+ addr_mode = ILI9341_MADCTL_MY;
+ break;
+ case 270:
+ addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY |
+ ILI9341_MADCTL_MX;
+ break;
+ }
+
+ addr_mode |= ILI9341_MADCTL_BGR;
+ mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
+ mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
+ drm_info(&dbidev->drm, "Initialized display serial interface\n");
+out_exit:
+ drm_dev_exit(idx);
+}
+
+static const struct drm_simple_display_pipe_funcs ili9341_dbi_funcs = {
+ .enable = ili9341_dbi_enable,
+ .disable = mipi_dbi_pipe_disable,
+ .update = mipi_dbi_pipe_update,
+ .prepare_fb = drm_gem_simple_display_pipe_prepare_fb,
+};
+
+static const struct drm_display_mode ili9341_dbi_mode = {
+ DRM_SIMPLE_MODE(240, 320, 37, 49),
+};
+
+DEFINE_DRM_GEM_CMA_FOPS(ili9341_dbi_fops);
+
+static struct drm_driver ili9341_dbi_driver = {
+ .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+ .fops = &ili9341_dbi_fops,
+ DRM_GEM_CMA_DRIVER_OPS_VMAP,
+ .debugfs_init = mipi_dbi_debugfs_init,
+ .name = "ili9341",
+ .desc = "Ilitek ILI9341",
+ .date = "20210716",
+ .major = 1,
+ .minor = 0,
+};
+
+static int ili9341_dbi_probe(struct spi_device *spi, struct gpio_desc *dc,
+ struct gpio_desc *reset)
+{
+ struct device *dev = &spi->dev;
+ struct mipi_dbi_dev *dbidev;
+ struct mipi_dbi *dbi;
+ struct drm_device *drm;
+ struct regulator *vcc;
+ u32 rotation = 0;
+ int ret;
+
+ vcc = devm_regulator_get_optional(dev, "vcc");
+ if (IS_ERR(vcc))
+ dev_err(dev, "get optional vcc failed\n");
+
+ dbidev = devm_drm_dev_alloc(dev, &ili9341_dbi_driver,
+ struct mipi_dbi_dev, drm);
+ if (IS_ERR(dbidev))
+ return PTR_ERR(dbidev);
+
+ dbi = &dbidev->dbi;
+ drm = &dbidev->drm;
+ dbi->reset = reset;
+ dbidev->regulator = vcc;
+
+ drm_mode_config_init(drm);
+
+ dbidev->backlight = devm_of_find_backlight(dev);
+ if (IS_ERR(dbidev->backlight))
+ return PTR_ERR(dbidev->backlight);
+
+ device_property_read_u32(dev, "rotation", &rotation);
+
+ ret = mipi_dbi_spi_init(spi, dbi, dc);
+ if (ret)
+ return ret;
+
+ ret = mipi_dbi_dev_init(dbidev, &ili9341_dbi_funcs,
+ &ili9341_dbi_mode, rotation);
+ if (ret)
+ return ret;
+
+ drm_mode_config_reset(drm);
+
+ ret = drm_dev_register(drm, 0);
+ if (ret)
+ return ret;
+
+ spi_set_drvdata(spi, drm);
+
+ drm_fbdev_generic_setup(drm, 0);
+
+ return 0;
+}
+
+static int ili9341_dpi_probe(struct spi_device *spi, struct gpio_desc *dc,
+ struct gpio_desc *reset)
+{
+ struct device *dev = &spi->dev;
+ struct ili9341 *ili;
+ int ret;
+
+ ili = devm_kzalloc(dev, sizeof(struct ili9341), GFP_KERNEL);
+ if (!ili)
+ return -ENOMEM;
+
+ ili->dbi = devm_kzalloc(dev, sizeof(struct mipi_dbi),
+ GFP_KERNEL);
+ if (!ili->dbi)
+ return -ENOMEM;
+
+ ili->supplies[0].supply = "vci";
+ ili->supplies[1].supply = "vddi";
+ ili->supplies[2].supply = "vddi-led";
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ili->supplies),
+ ili->supplies);
+ if (ret < 0) {
+ dev_err(dev, "failed to get regulators: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dbi_spi_init(spi, ili->dbi, dc);
+ if (ret)
+ return ret;
+
+ spi_set_drvdata(spi, ili);
+ ili->reset_gpio = reset;
+ /*
+ * Every new incarnation of this display must have a unique
+ * data entry for the system in this driver.
+ */
+ ili->conf = of_device_get_match_data(dev);
+ if (!ili->conf) {
+ dev_err(dev, "missing device configuration\n");
+ return -ENODEV;
+ }
+
+ ili->max_spi_speed = ili->conf->max_spi_speed;
+ drm_panel_init(&ili->panel, dev, &ili9341_dpi_funcs,
+ DRM_MODE_CONNECTOR_DPI);
+ drm_panel_add(&ili->panel);
+
+ return 0;
+}
+
+static int ili9341_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct gpio_desc *dc;
+ struct gpio_desc *reset;
+ const struct spi_device_id *id = spi_get_device_id(spi);
+
+ reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(reset))
+ dev_err(dev, "Failed to get gpio 'reset'\n");
+
+ dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
+ if (IS_ERR(dc))
+ dev_err(dev, "Failed to get gpio 'dc'\n");
+
+ if (!strcmp(id->name, "sf-tc240t-9370-t"))
+ return ili9341_dpi_probe(spi, dc, reset);
+ else if (!strcmp(id->name, "yx240qv29"))
+ return ili9341_dbi_probe(spi, dc, reset);
+
+ return -1;
+}
+
+static int ili9341_remove(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct ili9341 *ili = spi_get_drvdata(spi);
+ struct drm_device *drm = spi_get_drvdata(spi);
+
+ if (!strcmp(id->name, "sf-tc240t-9370-t")) {
+ ili9341_dpi_power_off(ili);
+ drm_panel_remove(&ili->panel);
+ } else if (!strcmp(id->name, "yx240qv29")) {
+ drm_dev_unplug(drm);
+ drm_atomic_helper_shutdown(drm);
+ }
+ return 0;
+}
+
+static void ili9341_shutdown(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+
+ if (!strcmp(id->name, "yx240qv29"))
+ drm_atomic_helper_shutdown(spi_get_drvdata(spi));
+}
+
+static const struct of_device_id ili9341_of_match[] = {
+ {
+ .compatible = "st,sf-tc240t-9370-t",
+ .data = &ili9341_stm32f429_disco_data,
+ },
+ {
+ /* porting from tiny/ili9341.c
+ * for original mipi dbi compitable
+ */
+ .compatible = "adafruit,yx240qv29",
+ .data = NULL,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ili9341_of_match);
+
+static const struct spi_device_id ili9341_id[] = {
+ { "yx240qv29", 0 },
+ { "sf-tc240t-9370-t", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, ili9341_id);
+
+static struct spi_driver ili9341_driver = {
+ .probe = ili9341_probe,
+ .remove = ili9341_remove,
+ .shutdown = ili9341_shutdown,
+ .id_table = ili9341_id,
+ .driver = {
+ .name = "panel-ilitek-ili9341",
+ .of_match_table = ili9341_of_match,
+ },
+};
+module_spi_driver(ili9341_driver);
+
+MODULE_AUTHOR("Dillon Min <dillon.minfei@xxxxxxxxx>");
+MODULE_DESCRIPTION("ILI9341 LCD panel driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
