On Wed, Jul 21, 2021 at 04:04:08PM +0200, Maxime Ripard wrote:
> Bitbanged 1-Wire buses are supported by Linux thanks to their device
> tree binding.
>
> Now that we have the DT validation in place, let's convert the device
> tree bindings for that driver over to a YAML schema.
>
> Cc: Daniel Mack <zonque@xxxxxxxxx>
> Cc: Evgeniy Polyakov <zbr@xxxxxxxxxxx>
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
> ---
> .../devicetree/bindings/w1/w1-gpio.txt | 27 ------------
> .../devicetree/bindings/w1/w1-gpio.yaml | 43 +++++++++++++++++++
> 2 files changed, 43 insertions(+), 27 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.txt
> create mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt
> deleted file mode 100644
> index 3d6554eac240..000000000000
> --- a/Documentation/devicetree/bindings/w1/w1-gpio.txt
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -w1-gpio devicetree bindings
> -
> -Required properties:
> -
> - - compatible: "w1-gpio"
> - - gpios: one or two GPIO specs:
> - - the first one is used as data I/O pin
> - - the second one is optional. If specified, it is used as
> - enable pin for an external pin pullup.
> -
> -Optional properties:
> -
> - - linux,open-drain: if specified, the data pin is considered in
> - open-drain mode.
> -
> -Also refer to the generic w1.txt document.
> -
> -Examples:
> -
> - onewire {
> - compatible = "w1-gpio";
> - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
> -
> - battery {
> - // ...
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.yaml b/Documentation/devicetree/bindings/w1/w1-gpio.yaml
> new file mode 100644
> index 000000000000..4a780a988718
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/w1/w1-gpio.yaml
> @@ -0,0 +1,43 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/w1/w1-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bitbanged GPIO 1-Wire Bus Device Tree Bindings
> +
> +maintainers:
> + - Daniel Mack <zonque@xxxxxxxxx>
> +
> +properties:
> + compatible:
> + const: w1-gpio
> +
> + gpios:
> + minItems: 1
> + maxItems: 2
> + items:
> + - description: Data I/O pin
> + - description: Enable pin for an external pull-up resistor
> +
> + linux,open-drain:
> + type: boolean
> + description: >
> + If specified, the data pin is considered in open-drain mode.
> +
> +required:
> + - compatible
> + - gpios
> +
> +additionalProperties: false
Presumably we might have child devices:
additionalProperties:
type: object
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + onewire {
> + compatible = "w1-gpio";
> + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
> + };
> +
> +...
> --
> 2.31.1
>
>
