On Wed, Jul 21, 2021 at 04:03:42PM +0200, Maxime Ripard wrote: > The UBlox Neo 6M is supported by Linux thanks to its device tree > binding. > > Now that we have the DT validation in place, let's convert the device > tree bindings for that driver over to a YAML schema. > > Cc: Johan Hovold <johan@xxxxxxxxxx> > Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> > --- > .../bindings/gnss/u-blox,neo-6m.yaml | 62 +++++++++++++++++++ > .../devicetree/bindings/gnss/u-blox.txt | 45 -------------- > 2 files changed, 62 insertions(+), 45 deletions(-) > create mode 100644 Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml > delete mode 100644 Documentation/devicetree/bindings/gnss/u-blox.txt > > diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml > new file mode 100644 > index 000000000000..45b886ae0f45 > --- /dev/null > +++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml > @@ -0,0 +1,62 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: U-blox GNSS Receiver Device Tree Bindings > + > +maintainers: > + - Johan Hovold <johan@xxxxxxxxxx> > + > +description: > > + The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces. > + > +properties: > + compatible: > + enum: > + - u-blox,neo-6m > + - u-blox,neo-8 > + - u-blox,neo-m8 > + > + reg: > + description: > > + The DDC Slave Address, SPI chip select address, the number of the USB hub > + port or the USB host-controller port to wich this device is attached, s/wich/which/ > + depending on the bus used. Required for the DDC, SPI or USB busses. > + > + vcc-supply: > + description: > > + Main voltage regulator > + > + timepulse-gpios: > + maxItems: 1 > + description: > > + Time pulse GPIO > + > + u-blox,extint-gpios: > + maxItems: 1 > + description: > > + GPIO connected to the "external interrupt" input pin > + > + v-bckp-supply: > + description: > > + Backup voltage regulator > + > + current-speed: true > + > +required: > + - compatible > + - vcc-supply > + > +additionalProperties: false > + > +examples: > + - | > + uart { serial { > + gnss { > + compatible = "u-blox,neo-8"; > + v-bckp-supply = <&gnss_v_bckp_reg>; > + vcc-supply = <&gnss_vcc_reg>; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/gnss/u-blox.txt b/Documentation/devicetree/bindings/gnss/u-blox.txt > deleted file mode 100644 > index 7cdefd058fe0..000000000000 > --- a/Documentation/devicetree/bindings/gnss/u-blox.txt > +++ /dev/null > @@ -1,45 +0,0 @@ > -u-blox GNSS Receiver DT binding > - > -The u-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces. > - > -Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic > -properties. > - > -Required properties: > - > -- compatible : Must be one of > - > - "u-blox,neo-6m" > - "u-blox,neo-8" > - "u-blox,neo-m8" > - > -- vcc-supply : Main voltage regulator > - > -Required properties (DDC): > -- reg : DDC (I2C) slave address > - > -Required properties (SPI): > -- reg : SPI chip select address > - > -Required properties (USB): > -- reg : Number of the USB hub port or the USB host-controller port > - to which this device is attached > - > -Optional properties: > - > -- timepulse-gpios : Time pulse GPIO > -- u-blox,extint-gpios : GPIO connected to the "external interrupt" input pin > -- v-bckp-supply : Backup voltage regulator > - > -Example: > - > -serial@1234 { > - compatible = "ns16550a"; > - > - gnss { > - compatible = "u-blox,neo-8"; > - > - v-bckp-supply = <&gnss_v_bckp_reg>; > - vcc-supply = <&gnss_vcc_reg>; > - }; > -}; > -- > 2.31.1 > >
