[PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vamsi Krishna Lanka <quic_vamslank@xxxxxxxxxxx>

Hello,

Changes from v1:
 - Addressed Bjorn's comments 

This series adds devicetree support for Qualcomm SDX65 platform and MTP
board. This series functionally depends on Add Pdc, GCC and RPMh Clock support
series [1] and Add pinctrl support for SDX65 [2] which are under review.

With this current devicetree support, the MTP can boot into initramfs
shell.

Thanks,
Vamsi

Vamsi krishna Lanka (3):
  dt-bindings: arm: qcom: Document SDX65 platform and boards
  ARM: dts: qcom: Add SDX65 platform and MTP board support
  ARM: dts: qcom: sdx65: Add pincontrol node

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 arch/arm/boot/dts/Makefile                    |   3 +-
 arch/arm/boot/dts/qcom-sdx65-mtp.dts          |  25 +++
 arch/arm/boot/dts/qcom-sdx65.dtsi             | 210 ++++++++++++++++++
 4 files changed, 243 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/qcom-sdx65-mtp.dts
 create mode 100644 arch/arm/boot/dts/qcom-sdx65.dtsi

-- 
2.32.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux