Add devicetree binding for Qualcomm PCIe EP controller used in platforms like SDX55. The EP controller is based on the Designware core with Qualcomm specific wrappers. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- .../devicetree/bindings/pci/qcom,pcie-ep.yaml | 158 ++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml new file mode 100644 index 000000000000..9fe6d1cef767 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCIe Endpoint Controller binding + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> + +allOf: + - $ref: "pci-ep.yaml#" + +properties: + compatible: + const: qcom,sdx55-pcie-ep + + reg: + items: + - description: Qualcomm specific PARF configuration registers + - description: Designware PCIe registers + - description: External local bus interface registers + - description: Address Translation Unit (ATU) registers + - description: Memory region used to map remote RC address space + - description: BAR memory region + + reg-names: + items: + - const: parf + - const: dbi + - const: elbi + - const: atu + - const: addr_space + - const: mmio + + clocks: + items: + - description: PCIe Auxiliary clock + - description: PCIe CFG AHB clock + - description: PCIe Master AXI clock + - description: PCIe Slave AXI clock + - description: PCIe Slave Q2A AXI clock + - description: PCIe Sleep clock + - description: PCIe Reference clock + + clock-names: + items: + - const: aux + - const: cfg + - const: bus_master + - const: bus_slave + - const: slave_q2a + - const: sleep + - const: ref + + qcom,perst-regs: + description: Reference to a syscon representing TCSR followed by the two + offsets within syscon for Perst enable and Perst separation + enable registers + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 + + interrupts: + items: + - description: PCIe Global interrupt + - description: PCIe Doorbell interrupt + + interrupt-names: + items: + - const: global + - const: doorbell + + reset-gpios: + description: GPIO that is being used as PERST# input signal + maxItems: 1 + + wake-gpios: + description: GPIO that is being used as WAKE# output signal + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: core + + power-domains: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: pciephy + + num-lanes: + default: 2 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - qcom,perst-regs + - interrupts + - interrupt-names + - reset-gpios + - resets + - reset-names + - power-domains + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdx55.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + pcie_ep: pcie-ep@40000000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40002000 0x1000>, + <0x01c03000 0x3000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio"; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", "cfg", "bus_master", "bus_slave", + "slave_q2a", "sleep", "ref"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", "doorbell"; + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie0_lane>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + }; -- 2.25.1
