On Thu, Jul 15, 2021 at 08:12:00PM +0800, Yong Wu wrote: > Add the binding for smi-sub-common. The SMI block diagram like this: > > IOMMU > | | > smi-common > ------------------ > | .... | > larb0 larb7 <-max is 8 > > The smi-common connects with smi-larb and IOMMU. The maximum larbs number > that connects with a smi-common is 8. If the engines number is over 8, > sometimes we use a smi-sub-common which is nearly same with smi-common. > It supports up to 8 input and 1 output(smi-common has 2 output) > > Something like: > > IOMMU > | | > smi-common > --------------------- > | | ... > larb0 sub-common ... <-max is 8 > ----------- > | | ... <-max is 8 too. > larb2 larb5 > > We don't need extra SW setting for smi-sub-common, only the sub-common has > special clocks need to enable when the engines access dram. > > If it is sub-common, it should have a "mediatek,smi" phandle to point to > its smi-common. meanwhile, the sub-common only has one gals clock. > > Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx> > --- > .../mediatek,smi-common.yaml | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml > index 602592b6c3f5..f79d99ebc440 100644 > --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml > +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml > @@ -38,6 +38,7 @@ properties: > - mediatek,mt8192-smi-common > - mediatek,mt8195-smi-common-vdo > - mediatek,mt8195-smi-common-vpp > + - mediatek,mt8195-smi-sub-common > > - description: for mt7623 > items: > @@ -67,6 +68,10 @@ properties: > minItems: 2 > maxItems: 4 > > + mediatek,smi: > + $ref: /schemas/types.yaml#/definitions/phandle-array If only a phandle, then s/phandle-array/phandle/ > + description: a phandle to the smi-common node above. Only for sub-common. > + > required: > - compatible > - reg > @@ -93,6 +98,26 @@ allOf: > - const: smi > - const: async > > + - if: # only for sub common > + properties: > + compatible: > + contains: > + enum: > + - mediatek,mt8195-smi-sub-common > + then: > + required: > + - mediatek,smi > + properties: > + clock: > + items: > + minItems: 3 > + maxItems: 3 > + clock-names: > + items: > + - const: apb > + - const: smi > + - const: gals0 > + > - if: # for gen2 HW that have gals > properties: > compatible: > -- > 2.18.0 > >
