Re: [Patch v3 4/6] arm64: boot: dts: qcom: sdm45: Add support for LMh node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/19/21 12:33 PM, Bjorn Andersson wrote:
On Thu 08 Jul 07:06 CDT 2021, Thara Gopinath wrote:

Add LMh nodes for cpu cluster0 and cpu cluster1. Also add interrupt
support in cpufreq node to capture the LMh interrupt and let the scheduler
know of the max frequency throttling.


Just noticed, could you please drop "boot: " from $subject and add the
missing '8', as you're resubmitting the series.

Sure..

Warm Regards
Thara

Regards,
Bjorn

Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
---

v2->v3:
	- Changed the LMh low and high trip to 94500 and 95000 mC from
	  74500 and 75000 mC. This was a bug that got introduced in v2.
v1->v2:
	- Dropped dt property qcom,support-lmh as per Bjorn's review comments.
	- Changed lmh compatible from generic to platform specific.
	- Introduced properties specifying arm, low and high temp thresholds for LMh
	  as per Daniel's suggestion.

  arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 ++++++++++++++++++++++++++
  1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0a86fe71a66d..4da6b8f3dd7b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3646,6 +3646,30 @@ swm: swm@c85 {
  			};
  		};
+ lmh_cluster1: lmh@17d70800 {
+			compatible = "qcom,sdm845-lmh";
+			reg = <0 0x17d70800 0 0x401>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,lmh-cpu-id = <0x4>;
+			qcom,lmh-temperature-arm = <65000>;
+			qcom,lmh-temperature-low = <94500>;
+			qcom,lmh-temperature-high = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		lmh_cluster0: lmh@17d78800 {
+			compatible = "qcom,sdm845-lmh";
+			reg = <0 0x17d78800 0 0x401>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,lmh-cpu-id = <0x0>;
+			qcom,lmh-temperature-arm = <65000>;
+			qcom,lmh-temperature-low = <94500>;
+			qcom,lmh-temperature-high = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
  		sound: sound {
  		};
@@ -4911,6 +4935,8 @@ cpufreq_hw: cpufreq@17d43000 {
  			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
  			reg-names = "freq-domain0", "freq-domain1";
+ interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>;
+
  			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
  			clock-names = "xo", "alternate";
--
2.25.1






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux