On Mon, 19 Jul 2021 16:37:34 +0530, satya priya wrote: > Convert Qualcomm PMIC GPIO bindings from .txt to .yaml format. > > Signed-off-by: satya priya <skakit@xxxxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > --- > Changes in V2: > - As per Rob's comments fixed bot erros. > - Moved this patch to end of the series so that other patches are not > blocked on this. > > Changes in V3: > - As per Rob's comments, added maxItems for reg and interrupts. > Added reference of "pinmux-node.yaml" and "pincfg-node.yaml". > Made 'additionalProperties' as false. > > Changes in V4: > - As per Rob's comments, added description for interrupts, defined > constraints for "qcom,drive-strength", dropped description for function > property. > > Changes in RESEND V4: > - Rebased on linux-next and sent. > > Changes in V5: > - Fixed Bjorn's comments on [1] > > [1] https://lore.kernel.org/patchwork/patch/1434144/ > > Changes in V6: > - As per Bjorn's comments, removed formatting for description, changed > node name to be more specific to qcom pmic, and fixed few other minor > things as suggested here [2]. > > [2] https://lore.kernel.org/patchwork/patch/1452812/#1654560 > > .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 288 --------------------- > .../bindings/pinctrl/qcom,pmic-gpio.yaml | 259 ++++++++++++++++++ > 2 files changed, 259 insertions(+), 288 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/qcom,pm8008.example.dt.yaml: gpio@c000: compatible: ['qcom,pm8008-gpio'] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/qcom,pm8008.example.dt.yaml: gpio@c000: 'gpio-ranges' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml \ndoc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1506906 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
