Re: [PATCH v2 2/2] pwm: add this patch to support the new pwm of Rockchip SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




caesar,

On Fri, Jul 25, 2014 at 3:29 AM, caesar <caesar.wang@xxxxxxxxxxxxxx> wrote:
> Hi Thierry,
>
>
>
>
> 在 2014年07月21日 21:27, Thierry Reding 写道:
>>
>> On Mon, Jul 21, 2014 at 08:58:42PM +0800, caesar wrote:
>>
>>> 于 2014年07月21日 16:50, Thierry Reding 写道:
>>>>
>>>> On Sat, Jul 19, 2014 at 08:55:29PM +0800, Caesar Wang wrote:
>>
>> [...]
>>>>>
>>>>>         struct rockchip_pwm_chip *pc;
>>>>>         struct resource *r;
>>>>>         int ret;
>>>>> @@ -119,7 +182,10 @@ static int rockchip_pwm_probe(struct
>>>>> platform_device *pdev)
>>>>>                 return -ENOMEM;
>>>>>         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>>> -       pc->base = devm_ioremap_resource(&pdev->dev, r);
>>>>> +       if (!strcmp(of_id->compatible, "rockchip,vop-pwm"))
>>>>> +               pc->base = devm_ioremap(&pdev->dev, r->start,
>>>>> resource_size(r));
>>>>> +       else
>>>>> +               pc->base = devm_ioremap_resource(&pdev->dev, r);
>>>>
>>>> Sorry, this still isn't an option. You really shouldn't remap I/O
>>>> regions that other drivers may be using. You hinted at a shared register
>>>> space during the review of the initial version. Can you provide more
>>>> detail about what exactly the memory map looks like of the rk3288? Is
>>>> there some kind of technical reference manual that I could look at? Or
>>>> do you have a device tree extract that shows what the memory map looks
>>>> like?
>>>>
>>>> Thierry
>>>
>>> Maybe,you can look at the ARM: dts: rk3288:
>>>
>>> https://github.com/rkchrome/kernel/blob/master/arch/arm/boot/dts/rk3288.dtsi
>>> There is some lcdc and vop-pwm map address for rk3288.
>>>
>>> ,and you can look at the vop-introduce.pdf and vop-register.pdf in Annex.
>>>
>>> Maybe,I should put the vop-pwm in lcdc driver,but I don't hope do so it.
>>>
>>> Could you give a suggestion to solve it? Thanks.
>>
>> It looks like you could turn the lcdc device into an MFD device so that
>> it can instantiate two devices, one for the display controller, the
>> other for the PWM. Or perhaps it would even work with only a single
>> child device.
>>
>> The device tree would become something like this:
>>
>>         lcdc@ff930000 {
>>                 compatible = "rockchip,rk3288-lcdc";
>>                 ...
>>
>>                 pwm@ff9301a0 {
>>                         compatible = "rockchip,vop-pwm";
>>                         ...
>>                 };
>>         };
>>
>> And your driver would do something like:
>>
>>         static const struct resource pwm_resources[] = {
>>                 {
>>                         .start = 0x1a0,
>>                         .end = 0x1af,
>>                         .flags = IORESOURCE_MEM,
>>                 },
>>         };
>>
>>         static const struct mfd_cell subdevices[] = {
>>                 {
>>                         .name = "pwm",
>>                         .id = 1,
>>                         .of_compatible = "rockchip,vop-pwm",
>>                         .num_resources = ARRAY_SIZE(pwm_resources),
>>                         .resources = pwm_resources,
>>                 },
>>         };
>>
>>         static int lcdc_probe(struct platform_device *pdev)
>>         {
>>                 struct resource *regs;
>>                 ...
>>
>>                 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>
>>                 ...
>>
>>                 err = mfd_add_devices(&pdev->dev, 0, subdevices,
>> ARRAY_SIZE(subdevices),
>>                                       regs, NULL, NULL);
>>                 ...
>>         }
>>
>> Thierry
>
> Sorry,I might a little trouble for the changes.
>
> The driver changes only for lcdc? If that is the case,I suddenly don't know
> how to do it ?
>
> Maybe,I didn't say it clearly.
>
> lcdc0: lcdc@ff930000                   |     vop0pwm: pwm@ff9301a0
> reg = <0xff930000 0x10000>     |      reg = <0xff9301a0 0x10>;
>
> The lcdc has to add resource's address  from  0xff930000 to 0xff93ffff.
>
> When the  pwm driver is loading vop0pwm. the "devm_ioremap_resource()" will
> be used in probe();
>
> I think it will be occur a fail. because the resource [mem
> 0xff9301a0-0xff9301af] has be requested by lcdc.
> =>rockchip-pwm ff9301a0.pwm: can't request region for resource [mem
> 0xff9301a0-0xff9301af]
>
> If I do the changes in pwm driver,do you have a other suggestion for it?
> thanks.:-)

Sorry if this is stupid (and I haven't tried it), but does "ranges"
help solve this problem?  AKA:

         lcdc@ff930000 {
                 compatible = "rockchip,rk3288-lcdc";
                 reg = <0xff930000 0x10000>;
                 #address-cells = <2>;
                 #size-cells = <1>;
                 ranges = <0 0xff9301a0 0x10>;
                 ...

                 pwm@0,0 {
                         compatible = "rockchip,vop-pwm";
                         reg = <0 0 0x10>;
                        ...
                 };
         };

Does that avoid the failure?  The lcdc driver would need to call
of_platform_populate() to make the PWM show up.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux