[PATCH 01/17] Revert "soc: imx: gpcv2: move reset assert after requesting domain power up"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This reverts commit a77ebdd9f553. It turns out that the VPU domain has no
different requirements, even though the downstream ATF implementation seems
to suggest otherwise. Powering on the domain with the reset asserted works
fine. As the changed sequence has caused sporadic issues with the GPU
domains, just revert the change to go back to the working sequence.

Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
 drivers/soc/imx/gpcv2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 34a9ac1f2b9b..8b7a01773aec 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -244,6 +244,8 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 		goto out_regulator_disable;
 	}
 
+	reset_control_assert(domain->reset);
+
 	if (domain->bits.pxx) {
 		/* request the domain to power up */
 		regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
@@ -266,8 +268,6 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 				  GPC_PGC_CTRL_PCR);
 	}
 
-	reset_control_assert(domain->reset);
-
 	/* delay for reset to propagate */
 	udelay(5);
 
-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux