Hi-- On 7/16/21 2:43 AM, Gene Chen wrote: > From: Gene Chen <gene_chen@xxxxxxxxxxx> > > Add basic support for the battery charger for MT6360 PMIC > > Signed-off-by: Gene Chen <gene_chen@xxxxxxxxxxx> > --- > drivers/power/supply/Kconfig | 11 + > drivers/power/supply/Makefile | 1 + > drivers/power/supply/mt6360_charger.c | 867 ++++++++++++++++++++++++++ > 3 files changed, 879 insertions(+) > create mode 100644 drivers/power/supply/mt6360_charger.c > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > index 11f5368e810e..81f02f8d4377 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -577,6 +577,17 @@ config CHARGER_MP2629 > Battery charger. This driver provides Battery charger power management > functions on the systems. > > +config CHARGER_MT6360 > + tristate "Mediatek MT6360 Charger Driver" > + depends on MFD_MT6360 > + depends on REGULATOR > + select LINEAR_RANGES > + help > + Say Y here to enable MT6360 Charger Part. > + The device supports High-Accuracy Voltage/Current Regulation, > + Average Input Current Regulation, Battery Tempature Sensing, Temperature > + Over-Temperature Protection, DPDM Detection for BC1.2 > + > config CHARGER_QCOM_SMBB > tristate "Qualcomm Switch-Mode Battery Charger and Boost" > depends on MFD_SPMI_PMIC || COMPILE_TEST -- ~Randy Reported-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
