[+cc linux-pci] On Fri, Jul 16, 2021 at 07:28:43PM +0530, Prasad Malisetty wrote: > Changes in v4 as suggested by Bjorn: > > * Changed pipe clk mux name as gcc_pcie_1_pipe_clk_src. > * Changed pipe_ext_src as phy_pipe_clk. > * Updated commit message for [PATCH v4 4/4]. > > > Changes in v3: > * Changed pipe clock names in dt bindings as pipe_mux and phy_pipe. > * Moved reset and NVMe GPIO pin configs into board specific file. > * Updated pipe clk mux commit message. > > Changes in v2: > * Moved pcie pin control settings into IDP file. > * Replaced pipe_clk_src with pipe_clk_mux in pcie driver > * Included pipe clk mux setting change set in this series > > Prasad Malisetty (4): > dt-bindings: pci: qcom: Document PCIe bindings for SC720 > arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes > arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board > PCIe: qcom: Add support to control pipe clk src > > .../devicetree/bindings/pci/qcom,pcie.txt | 17 +++ > arch/arm64/boot/dts/qcom/sc7280-idp.dts | 38 +++++++ > arch/arm64/boot/dts/qcom/sc7280.dtsi | 125 +++++++++++++++++++++ > drivers/pci/controller/dwc/pcie-qcom.c | 22 ++++ $ ./scripts/get_maintainer.pl -f drivers/pci/controller/dwc/pcie-qcom.c tells you that linux-pci should be included. One reason that's important is because patchwork watches linux-pci for incoming patches, and I use patchwork as my to-do list.
