Remove un-used "phy-reset-delay" property which found when do dtbs_check (set additionalProperties: false in fsl,fec.yaml). Double check current driver and commit history, "phy-reset-delay" never comes up, so it should be safe to remove it. $ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/fsl,fec.yaml arch/arm/boot/dts/imx7d-mba7.dt.yaml: ethernet@30be0000: 'phy-reset-delay' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/imx7d-mba7.dt.yaml: ethernet@30bf0000: 'phy-reset-delay' does not match any of the regexes: 'pinctrl-[0-9]+' /arch/arm/boot/dts/imx7s-mba7.dt.yaml: ethernet@30be0000: 'phy-reset-delay' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx> --- arch/arm/boot/dts/imx7-mba7.dtsi | 1 - arch/arm/boot/dts/imx7d-mba7.dts | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi index c6d1c63f7905..5e6bef230dc7 100644 --- a/arch/arm/boot/dts/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/imx7-mba7.dtsi @@ -216,7 +216,6 @@ phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; phy-reset-duration = <1>; - phy-reset-delay = <1>; phy-supply = <®_fec1_pwdn>; phy-handle = <ðphy1_0>; fsl,magic-packet; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts index 23856a8d4b8c..36ef6a3cdb0b 100644 --- a/arch/arm/boot/dts/imx7d-mba7.dts +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -23,7 +23,6 @@ phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; phy-reset-duration = <1>; - phy-reset-delay = <1>; phy-supply = <®_fec2_pwdn>; phy-handle = <ðphy2_0>; fsl,magic-packet; -- 2.17.1