> -----Original Message----- > From: Rob Herring <robh@xxxxxxxxxx> > Sent: 2021年7月15日 7:19 > To: Joakim Zhang <qiangqing.zhang@xxxxxxx> > Cc: davem@xxxxxxxxxxxxx; kuba@xxxxxxxxxx; andrew@xxxxxxx; > netdev@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; > linux-kernel@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx> > Subject: Re: [PATCH V1 net-next 1/5] dt-bindings: fec: add the missing clocks > properties > > On Fri, Jul 09, 2021 at 04:18:19PM +0800, Joakim Zhang wrote: > > From: Fugang Duan <fugang.duan@xxxxxxx> > > > > Both driver and dts have already used these clocks properties, so add > > the missing clocks info. > > > > Signed-off-by: Fugang Duan <fugang.duan@xxxxxxx> > > Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx> > > --- > > Documentation/devicetree/bindings/net/fsl-fec.txt | 11 +++++++++++ > > 1 file changed, 11 insertions(+) > > There's enough changes in this series, please convert this to schema. Hi Rob, Ok, I will first convert this binding into schema, then resend this patch set. Best Regards, Joakim Zhang > > > > diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt > > b/Documentation/devicetree/bindings/net/fsl-fec.txt > > index 9b543789cd52..6754be1b91c4 100644 > > --- a/Documentation/devicetree/bindings/net/fsl-fec.txt > > +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt > > @@ -39,6 +39,17 @@ Optional properties: > > tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII > interrupts. > > For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the > pulse > > per second interrupt associated with 1588 precision time protocol(PTP). > > +- clocks: Phandles to input clocks. > > +- clock-name: Should be the names of the clocks > > + - "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing. > > + - "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock. > > + - "ptp"(option), for IEEE1588 timer clock that requires the clock. > > + - "enet_clk_ref"(option), for MAC transmit/receiver reference clock like > > + RGMII TXC clock or RMII reference clock. It depends on board design, > > + the clock is required if RGMII TXC and RMII reference clock source from > > + SOC internal PLL. > > + - "enet_out"(option), output clock for external device, like supply clock > > + for PHY. The clock is required if PHY clock source from SOC. > > > > Optional subnodes: > > - mdio : specifies the mdio bus in the FEC, used as a container for > > phy nodes > > -- > > 2.17.1 > > > >
