From: Adam Ford <aford173@xxxxxxxxx> [ Upstream commit ebc666f39ff67a01e748c34d670ddf05a9e45220 ] The RZ/G2 boards expect there to be an external clock reference for USB2 EHCI controllers. For the Beacon boards, this reference clock is controlled by a programmable versaclock. Because the RZ/G2 family has a special clock driver when using an external clock, the third clock reference in the EHCI node needs to point to this special clock, called usb2_clksel. Since the usb2_clksel does not keep the usb_extal clock enabled, the 4th clock entry for the EHCI nodes needs to reference it to keep the clock running and make USB functional. Signed-off-by: Adam Ford <aford173@xxxxxxxxx> Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@xxxxxxxxx Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index d8046fedf9c1..e3c8b2fe143e 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -271,12 +271,12 @@ &du_out_rgb { &ehci0 { dr_mode = "otg"; status = "okay"; - clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>; }; &ehci1 { status = "okay"; - clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>; }; &hdmi0 { -- 2.30.2
