This adds the device tree bindings used by syscon-based LEDs.
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Bryan Wu <cooloney@xxxxxxxxx>
Cc: Richard Purdie <rpurdie@xxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
.../devicetree/bindings/leds/leds-syscon.txt | 83 ++++++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-syscon.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-syscon.txt b/Documentation/devicetree/bindings/leds/leds-syscon.txt
new file mode 100644
index 000000000000..460b9c3d1bd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-syscon.txt
@@ -0,0 +1,83 @@
+Device Tree Bindings for Syscon LEDs
+
+Required properties:
+- compatible : must be "syscon-leds".
+- regmap : a phandle to a syscon node containing a regmap
+
+Each LED is represented as a sub-node of the syscon-leds device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+- offset : register offset to the register controlling this LED
+- mask : bit mask for the bit controlling this LED in the register
+ typically 0x01, 0x02, 0x04 ...
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED. Valid
+ values are "on", "off", and "keep". If the LED is already on or off
+ and the default-state property is set the to same value, then no
+ glitch should be produced where the LED momentarily turns off (or
+ on). The "keep" setting will keep the LED at whatever its current
+ state is, without producing a glitch. The default is off if this
+ property is not present.
+
+Example:
+
+leds: leds@08 {
+ compatible = "syscon-leds";
+ regmap = <&syscon>;
+
+ led@bit0 {
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@bit1 {
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@bit2 {
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@bit3 {
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ default-state = "off";
+ };
+ led@bit4 {
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ default-state = "off";
+ };
+ led@bit5 {
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ default-state = "off";
+ };
+ led@bit6 {
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led@bit7 {
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+};
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
