On Wed, Jun 30, 2021 at 09:16:51AM +0530, Manivannan Sadhasivam wrote: > Add devicetree binding for Qualcomm PCIe EP controller used in platforms > like SDX55. The EP controller is based on the Designware core with > Qualcomm specific wrappers. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> > --- > .../devicetree/bindings/pci/qcom,pcie-ep.yaml | 160 ++++++++++++++++++ > 1 file changed, 160 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > new file mode 100644 > index 000000000000..9110d33809cd > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > @@ -0,0 +1,160 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm PCIe Endpoint Controller binding > + > +maintainers: > + - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> > + > +allOf: > + - $ref: "pci-ep.yaml#" > + > +properties: > + compatible: > + const: qcom,sdx55-pcie-ep > + > + reg: > + items: > + - description: Qualcomm specific PARF configuration registers > + - description: Designware PCIe registers > + - description: External local bus interface registers > + - description: Address Translation Unit (ATU) registers > + - description: Memory region used to map remote RC address space > + - description: BAR memory region > + > + reg-names: > + items: > + - const: parf > + - const: dbi > + - const: elbi > + - const: atu > + - const: addr_space > + - const: mmio > + > + clocks: > + items: > + - description: PCIe Auxiliary clock > + - description: PCIe CFG AHB clock > + - description: PCIe Master AXI clock > + - description: PCIe Slave AXI clock > + - description: PCIe Slave Q2A AXI clock > + - description: PCIe Sleep clock > + - description: PCIe Reference clock > + > + clock-names: > + items: > + - const: aux > + - const: cfg > + - const: bus_master > + - const: bus_slave > + - const: slave_q2a > + - const: sleep > + - const: ref > + > + qcom,perst-regs: > + description: Reference to a syscon representing TCSR followed by the two > + offsets within syscon for Perst enable and Perst separation > + enable registers > + $ref: "/schemas/types.yaml#/definitions/phandle-array" > + items: > + minItems: 3 > + maxItems: 3 > + > + interrupts: > + items: > + - description: PCIe Global interrupt > + - description: PCIe Doorbell interrupt > + > + interrupt-names: > + items: > + - const: global > + - const: doorbell > + > + reset-gpios: > + description: GPIO that is being used as PERST# input signal > + maxItems: 1 > + > + wake-gpios: > + description: GPIO that is being used as WAKE# output signal > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + reset-names: > + const: core > + > + power-domains: > + maxItems: 1 > + > + phys: > + maxItems: 1 > + > + phy-names: > + const: pciephy > + > + num-lanes: > + default: 2 > + > +required: > + - compatible > + - reg > + - reg-names > + - clocks > + - clock-names > + - qcom,perst-regs > + - interrupts > + - interrupt-names > + - reset-gpios > + - resets > + - reset-names > + - power-domains > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,gcc-sdx55.h> > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + pcie_ep: pcie-ep@40000000 { > + compatible = "qcom,sdx55-pcie-ep"; > + reg = <0x01c00000 0x3000>, > + <0x40000000 0xf1d>, > + <0x40000f20 0xc8>, > + <0x40001000 0x1000>, > + <0x40002000 0x1000>, > + <0x01c03000 0x3000>; > + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", > + "mmio"; > + > + clocks = <&gcc GCC_PCIE_AUX_CLK>, > + <&gcc GCC_PCIE_CFG_AHB_CLK>, > + <&gcc GCC_PCIE_MSTR_AXI_CLK>, > + <&gcc GCC_PCIE_SLV_AXI_CLK>, > + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, > + <&gcc GCC_PCIE_SLEEP_CLK>, > + <&gcc GCC_PCIE_0_CLKREF_CLK>; > + clock-names = "aux", "cfg", "bus_master", "bus_slave", > + "slave_q2a", "sleep", "ref"; > + > + qcom,perst-regs = <&tcsr 0xb258 0xb270>; > + > + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "global", "doorbell"; > + reset-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>; > + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; > + resets = <&gcc GCC_PCIE_BCR>; > + reset-names = "core"; > + power-domains = <&gcc PCIE_GDSC>; > + phys = <&pcie0_lane>; > + phy-names = "pciephy"; > + max-link-speed = <3>; > + num-lanes = <2>; > + > + status = "disabled"; Why are you disabling the example? Drop status. With that, Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
